Add a documentation of LED Multicolor LED class specific sysfs attributes. Signed-off-by: Dan Murphy <dmurphy@xxxxxx> --- .../ABI/testing/sysfs-class-led-multicolor | 57 +++++++++++++++++++ 1 file changed, 57 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-class-led-multicolor diff --git a/Documentation/ABI/testing/sysfs-class-led-multicolor b/Documentation/ABI/testing/sysfs-class-led-multicolor new file mode 100644 index 000000000000..2f102ede258b --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-led-multicolor @@ -0,0 +1,57 @@ +What: /sys/class/leds/<led>/colors/sync_enable +Date: April 2019 +KernelVersion: 5.2 +Contact: Dan Murphy <dmurphy@xxxxxx> +Description: read/write + Writing a 1 to this file will enable the synchronization of all + the defined color LEDs within the LED node. Brightness values + for each LED will be stored and written when sync is set to 1. + Writing a 0 to this file will disable syncing and allow + individual control of the LEDs brightness settings. + +What: /sys/class/leds/<led>/colors/sync +Date: April 2019 +KernelVersion: 5.2 +Contact: Dan Murphy <dmurphy@xxxxxx> +Description: write only + Writing a 1 to this file while sync_enable is set to 1 will + write the current brightness values to all defined LEDs within + the LED node. All LEDs defined will be configured based + on the brightness that has been requested. + + If sync_enable is set to 0 then writing a 1 to sync has no + affect on the LEDs. + +What: /sys/class/leds/<led>/colors/<led_color>/brightness +Date: April 2019 +KernelVersion: 5.2 +Contact: Dan Murphy <dmurphy@xxxxxx> +Description: read/write + The led_color directory is dynamically created based on the + colors defined by the registrar of the class. + The led_color can be but not limited to red, green, blue, + white, amber, yellow and violet. Drivers can also declare a + LED color for presentation. There is one directory per color + presented. The brightness file is created under each + led_color directory and controls the individual LED color + setting. + + If sync is enabled then writing the brightness value of the LED + is deferred until a 1 is written to + /sys/class/leds/<led>/color/sync. If syncing is + disabled then the LED brightness value will be written + immediately to the LED driver. + + The value of the color is from 0 to + /sys/class/leds/<led>/colors/<led_color>/max_brightness. + +What: /sys/class/leds/<led>/colors/<led_color>/max_brightness +Date: April 2019 +KernelVersion: 5.2 +Contact: Dan Murphy <dmurphy@xxxxxx> +Description: read only + Maximum brightness level for the LED color, default is + 255 (LED_FULL). + + If the LED does not support different brightness levels, this + should be 1. -- 2.21.0.5.gaeb582a983
