Hi Shawn, On Thursday, May 23, 2019 15:43, Shawn Guo wrote: > > On Wed, May 15, 2019 at 02:04:34PM +0800, Ran Wang wrote: > > Enable USB3 HW LPM feature for lx2160a and active patch for snps > > erratum A-010131. It will disable U1/U2 temperary when initiate U3 > > request. > > > > Signed-off-by: Ran Wang <ran.wang_1@xxxxxxx> > > --- > > Depend on: > > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flore > > .kernel.org%2Fpatchwork%2Fpatch%2F870134%2F&data=02%7C01%7Cr > an.wan > > > g_1%40nxp.com%7Cc6df41748bc243397d3008d6df526c04%7C686ea1d3bc2b4c > 6fa92 > > > cd99c5c301635%7C0%7C0%7C636941942428322802&sdata=NR2zs8BE%2 > FNn8KdP > > do6%2FsNwJJdx2VgaQTy5H4bAlTJgw%3D&reserved=0 > > Is the dependency accepted? No, I got no comment for that post since then. lore.kernel.org/patchwork/patch/870134/ Regards, Ran > > > > > arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 4 ++++ > > 1 files changed, 4 insertions(+), 0 deletions(-) > > > > diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi > > b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi > > index 125a8cc..0073df3 100644 > > --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi > > +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi > > @@ -696,6 +696,8 @@ > > interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; > > dr_mode = "host"; > > snps,quirk-frame-length-adjustment = <0x20>; > > + usb3-lpm-capable; > > + snps,dis-u1u2-when-u3-quirk; > > snps,dis_rxdet_inp3_quirk; > > snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; > > status = "disabled"; > > @@ -707,6 +709,8 @@ > > interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; > > dr_mode = "host"; > > snps,quirk-frame-length-adjustment = <0x20>; > > + usb3-lpm-capable; > > + snps,dis-u1u2-when-u3-quirk; > > snps,dis_rxdet_inp3_quirk; > > snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; > > status = "disabled"; > > -- > > 1.7.1 > >
