[PATCH v4 03/10] dt-bindings: ata: Update ahci bindings with possible per-port interrupts

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Update bindings to reflect the fact that a SATA IP can either have:
- only one interrupt: in this case an 'interrupts' property is
  declared at the root of the node;
or
- each SATA port can have their own interrupt: in this case there is
  one 'interrupts' property per port/sub-node and none at the root.

Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
---
 Documentation/devicetree/bindings/ata/ahci-platform.txt | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt
index e30fd106df4f..80261e2845b0 100644
--- a/Documentation/devicetree/bindings/ata/ahci-platform.txt
+++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt
@@ -53,6 +53,12 @@ And at least one of the following properties:
 - phys		    : reference to the SATA PHY node
 - target-supply     : regulator for SATA target power
 
+Sub-nodes optional properties:
+- interrupts        : <interrupt mapping for SATA ports IRQ>, please
+                      note that either the root SATA node has the
+                      interrupts property, or there is one per SATA
+                      port, but not both at the same time.
+
 Examples:
         sata@ffe08000 {
 		compatible = "snps,spear-ahci";
-- 
2.19.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux