Hello,
Support for Socionext's FIP controller intended for flash device interfacing.
The controller can operate in 'direct' or 'command' mode. One mode directly
talks and provide a read/write i/f to the flash device. Other works as plain
SPI mode. This driver runs the controller as a SPI controller.
I took over this driver update from Jassi.
Although more than a year has passed from previous version,
it would be great if you could review this patch series.
Changes since v4:
# Supported interrupt based data handling instead of polling
# Added prefix "SYNQUACER_HSSPI_"
# Replaced data read/write access with readsx()/writesx()
# Updated clock source handling, explicitly specify "iHCLK" or "iPCKL"
and removed array of clk
Changes since v3:
# Convert IS_ERR returned from devm_clk_get(iPCLK) to NULL, that way
we can call clk_xxx(IPCLK) without first checking for it being valid.
Changes since v2:
# Made iHCLK clock property required in DT, and iPCLK an optional extra.
# Hardcode max number of slaves to 4, as specified in the manual.
Changes since v1:
# Changed licence header to C++ style comment.
# Removed redundant lock and transfer_mode backup member.
# Fixed divisor to allow upto 254.
Masahisa Kojima (3):
MAINTAINERS: Add entry for Synquacer SPI driver
dt-bindings: spi: Add DT bindings for Synquacer
spi: Add spi driver for Socionext Synquacer platform
.../devicetree/bindings/spi/spi-synquacer.txt | 27 +
MAINTAINERS | 8 +
drivers/spi/Kconfig | 11 +
drivers/spi/Makefile | 1 +
drivers/spi/spi-synquacer.c | 731 +++++++++++++++++++++
5 files changed, 778 insertions(+)
create mode 100644 Documentation/devicetree/bindings/spi/spi-synquacer.txt
create mode 100644 drivers/spi/spi-synquacer.c
--
2.14.2
