Hello Sergei, On Tue, May 21, 2019 at 12:27:24PM +0300, Sergei Shtylyov wrote: > Hello! > > On 21.05.2019 2:50, megous@xxxxxxxxxx wrote: > > > From: Icenowy Zheng <icenowy@xxxxxxx> > > > > The PHY selection bit also exists on SoCs without an internal PHY; if it's > > set to 1 (internal PHY, default value) then the MAC will not make use of > > any PHY such SoCs. > ^ "on" or "with" missing? It's missing 'on'. thank you, Ondrej > > This problem appears when adapting for H6, which has no real internal PHY > > (the "internal PHY" on H6 is not on-die, but on a co-packaged AC200 chip, > > connected via RMII interface at GPIO bank A). > > > > Force the PHY selection bit to 0 when the SOC doesn't have an internal PHY, > > to address the problem of a wrong default value. > > > > Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx> > > Signed-off-by: Ondrej Jirman <megous@xxxxxxxxxx> > [...] > > MBR, Sergei
