Re: [PATCH v6 1/7] dt-bindings: usb: hd3ss3220 device tree binding document

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi

> > +Required properties:
> > + - compatible: Must be "ti,hd3ss3220".
> > + - reg: I2C slave address, must be 0x47 or 0x67 based on ADDR pin.
> > + - interrupts: <a b> where a is the interrupt number and b represents an
> > +   encoding of the sense and level information for the interrupt.
> > +
> > +Required sub-node:
> > + - connector : The "usb-c-connector" attached to the hd3ss3220 chip. The
> 
> s/connector :/connector:/

Maybe it is for alignment ?

> According to the connector/usb-connector.txt, should the connector node
> have ports, port@1 and an endpoint nodes like below?

"ports" is needed if it has multiple "port",
otherwise, single port is allowed from OF-graph point of view.

Thank you for your help !!
Best regards
---
Kuninori Morimoto



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux