GCE hardware stored event information in own internal sysram,
if the initial value in those sysram is not zero value
it will cause a situation that gce can wait the event immediately
after client ask gce to wait event but not really trigger the
corresponding hardware.
In order to make sure that the wait event function is
exactly correct, we need to clear the sysram value in
cmdq initial flow.
Fixes: 623a6143a845 ("mailbox: mediatek: Add Mediatek CMDQ driver")
Signed-off-by: Bibby Hsieh <bibby.hsieh@xxxxxxxxxxxx>
Reviewed-by: CK Hu <ck.hu@xxxxxxxxxxxx>
---
drivers/mailbox/mtk-cmdq-mailbox.c | 5 +++++
include/linux/mailbox/mtk-cmdq-mailbox.h | 2 ++
include/linux/soc/mediatek/mtk-cmdq.h | 3 ---
3 files changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/mailbox/mtk-cmdq-mailbox.c b/drivers/mailbox/mtk-cmdq-mailbox.c
index 6db1e2dd2dea..2c1b80d82c3a 100644
--- a/drivers/mailbox/mtk-cmdq-mailbox.c
+++ b/drivers/mailbox/mtk-cmdq-mailbox.c
@@ -20,6 +20,7 @@
#define CMDQ_NUM_CMD(t) (t->cmd_buf_size / CMDQ_INST_SIZE)
#define CMDQ_CURR_IRQ_STATUS 0x10
+#define CMDQ_SYNC_TOKEN_UPDATE 0x68
#define CMDQ_THR_SLOT_CYCLES 0x30
#define CMDQ_THR_BASE 0x100
#define CMDQ_THR_SIZE 0x80
@@ -103,8 +104,12 @@ static void cmdq_thread_resume(struct cmdq_thread *thread)
static void cmdq_init(struct cmdq *cmdq)
{
+ int i;
+
WARN_ON(clk_enable(cmdq->clock) < 0);
writel(CMDQ_THR_ACTIVE_SLOT_CYCLES, cmdq->base + CMDQ_THR_SLOT_CYCLES);
+ for (i = 0; i <= CMDQ_MAX_EVENT; i++)
+ writel(i, cmdq->base + CMDQ_SYNC_TOKEN_UPDATE);
clk_disable(cmdq->clock);
}
diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
index ccb73422c2fa..911475da7a53 100644
--- a/include/linux/mailbox/mtk-cmdq-mailbox.h
+++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
@@ -19,6 +19,8 @@
#define CMDQ_WFE_UPDATE BIT(31)
#define CMDQ_WFE_WAIT BIT(15)
#define CMDQ_WFE_WAIT_VALUE 0x1
+/** cmdq event maximum */
+#define CMDQ_MAX_EVENT 0x3ff
/*
* CMDQ_CODE_MASK:
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index 54ade13a9b15..4e8899972db4 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -13,9 +13,6 @@
#define CMDQ_NO_TIMEOUT 0xffffffffu
-/** cmdq event maximum */
-#define CMDQ_MAX_EVENT 0x3ff
-
struct cmdq_pkt;
struct cmdq_client {
--
2.18.0
