Re: [PATCH 00/17] Add Support for Kontron SMARC-sAMX6i

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, May 09, 2019 at 05:58:17PM +0200, Marco Felsch wrote:
> Hi,
> 
> this series adds the Kontron SoM 'SMARC-sAMX6i' which is compatible to
> the SMARC 1.1 standard [1]. Most of the muxing can be done within the
> SoM dtsi since the standard defines a unique SoM hardware interface.
> 
> This series is based on Priit Laes initial commit [2] which adds the
> initial support. I addressed the comments and changed the copyright
> since there where a lot of fixes.
> 
> Testers are welcome :) since I used a custome baseboard which doesn't
> use all of the interfaces.
> 
> [1] https://sget.org/standards/smarc
> [2] https://lore.kernel.org/patchwork/patch/762261/
> 
> Marco Felsch (14):
>   dt-bindings: add Kontron vendor prefix
>   ARCH: arm: dts: imx6qdl-kontron-samx6i: add SMARC SDIO interface
>   ARCH: arm: dts: imx6qdl-kontron-samx6i: add SMARC LCD interface
>   ARCH: arm: dts: imx6qdl-kontron-samx6i: add SMARC Management pins
>   ARCH: arm: dts: imx6qdl-kontron-samx6i: add SMARC GPIO interface
>   ARCH: arm: dts: imx6qdl-kontron-samx6i: add SMARC HDMI interface
>   ARCH: arm: dts: imx6qdl-kontron-samx6i: add SMARC CSI Camera interface
>   ARCH: arm: dts: imx6qdl-kontron-samx6i: add SMARC I2S interface
>   ARCH: arm: dts: imx6qdl-kontron-samx6i: add SMARC SPI1 interface
>   ARCH: arm: dts: imx6qdl-kontron-samx6i: add SMARC Watchdog
>   ARCH: arm: dts: imx6qdl-kontron-samx6i: add SMARC module eeprom
>   ARCH: arm: dts: imx6qdl-kontron-samx6i: add power management support
>   ARCH: arm: dts: imx6q-kontron-samx6i: add Kontron SMARC Quad/Dual SoM
>   ARCH: arm: dts: imx6dl-kontron-samx6i: add Kontron SMARC
>     Dual-Lite/Solo SoM
> 
> Michael Grzeschik (2):
>   ARCH: arm: dts: imx6qdl-kontron-samx6i: add SMARC SPI0 interface
>   ARCH: arm: dts: imx6qdl-kontron-samx6i: add boot spi-nor
> 
> Priit Laes (1):
>   ARCH: arm: dts: imx6qdl-kontron-samx6i: Add iMX6-based Kontron
>     SMARC-sAMX6i module

Do we really need so many patches for adding a single board support, or
can we squash some of them?

Shawn

> 
>  .../devicetree/bindings/vendor-prefixes.txt   |   1 +
>  arch/arm/boot/dts/imx6dl-kontron-samx6i.dtsi  |  12 +
>  arch/arm/boot/dts/imx6q-kontron-samx6i.dtsi   |  36 +
>  arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi | 812 ++++++++++++++++++
>  4 files changed, 861 insertions(+)
>  create mode 100644 arch/arm/boot/dts/imx6dl-kontron-samx6i.dtsi
>  create mode 100644 arch/arm/boot/dts/imx6q-kontron-samx6i.dtsi
>  create mode 100644 arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
> 
> -- 
> 2.20.1
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux