Hi Oleksij
> +static int ag71xx_mdio_mii_read(struct mii_bus *bus, int addr, int reg)
> +{
> + struct ag71xx *ag = bus->priv;
> + struct net_device *ndev = ag->ndev;
> + int err;
> + int ret;
> +
> + err = ag71xx_mdio_wait_busy(ag);
> + if (err)
> + return err;
> +
> + ag71xx_wr(ag, AG71XX_REG_MII_CMD, MII_CMD_WRITE);
It looks like you have not removed this.
> + ag71xx_wr(ag, AG71XX_REG_MII_ADDR,
> + ((addr & 0xff) << MII_ADDR_SHIFT) | (reg & 0xff));
> + ag71xx_wr(ag, AG71XX_REG_MII_CMD, MII_CMD_READ);
> +
> + err = ag71xx_mdio_wait_busy(ag);
> + if (err)
> + return err;
> +
> + ret = ag71xx_rr(ag, AG71XX_REG_MII_STATUS);
> + /*
> + * ar9331 doc: bits 31:16 are reserved and must be must be written
> + * with zero.
> + */
> + ret &= 0xffff;
> + ag71xx_wr(ag, AG71XX_REG_MII_CMD, MII_CMD_WRITE);
Or this.
> +
> + netif_dbg(ag, link, ndev, "mii_read: addr=%04x, reg=%04x, value=%04x\n",
> + addr, reg, ret);
> +
> + return ret;
> +}
> +
> +static int ag71xx_mdio_mii_write(struct mii_bus *bus, int addr, int reg,
> + u16 val)
> +{
> + struct ag71xx *ag = bus->priv;
> + struct net_device *ndev = ag->ndev;
> +
> + netif_dbg(ag, link, ndev, "mii_write: addr=%04x, reg=%04x, value=%04x\n",
> + addr, reg, val);
> +
> + ag71xx_wr(ag, AG71XX_REG_MII_ADDR,
> + ((addr & 0xff) << MII_ADDR_SHIFT) | (reg & 0xff));
addr have the vale 0-31. So a mask of 0xff is a couple of bits too
big.
> + ag71xx_wr(ag, AG71XX_REG_MII_CTRL, val);
> +
> + return ag71xx_mdio_wait_busy(ag);
> +}
> +static void ag71xx_link_adjust(struct ag71xx *ag, bool update)
> +{
> + struct net_device *ndev = ag->ndev;
> + struct phy_device *phydev = ndev->phydev;
> + u32 cfg2;
> + u32 ifctl;
> + u32 fifo5;
> +
> + if (!phydev->link && update) {
> + ag71xx_hw_stop(ag);
> + netif_carrier_off(ag->ndev);
phylib will take care of the carrier for you.
Andrew
