Dne petek, 17. maj 2019 ob 09:30:48 CEST je Maxime Ripard napisal(a):
> Hi,
>
> On Thu, May 16, 2019 at 06:10:39PM +0200, Jernej Skrabec wrote:
> > mmc1 node where wifi module is connected doesn't have properly defined
> > power supplies so wifi module is never powered up. Fix that by
> > specifying additional power supplies.
> >
> > Additionally, this STB may have either Realtek or Broadcom based wifi
> > module. One based on Broadcom module also needs external clock to work
> > properly. Fix that by adding clock property to wifi_pwrseq node.
> >
> > Fixes: e582b47a9252 ("ARM: dts: sun8i-h3: Add dts for the Beelink X2 STB")
> > Signed-off-by: Jernej Skrabec <jernej.skrabec@xxxxxxxx>
> > ---
> >
> > arch/arm/boot/dts/sun8i-h3-beelink-x2.dts | 5 +++++
> > 1 file changed, 5 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
> > b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts index
> > 6277f13f3eb3..6a0ac85b4616 100644
> > --- a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
> > +++ b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
> > @@ -89,7 +89,10 @@
> >
> > wifi_pwrseq: wifi_pwrseq {
> >
> > compatible = "mmc-pwrseq-simple";
> >
> > + pinctrl-names = "default";
>
> pinctrl-names only make sense with another pinctrl-[0-255]
> property. Did you forgot something here?
No, I just took BananaPi M2+ as a example, which has pinctrl-names property
too and no "pinctrl-*". But digging through history of this DT, it seems that
this is just leftover which somebody forgot to remove.
I'll send v2.
Best regards,
Jernej
