nand-ecc-strength and nand-ecc-step-size can be made optional as
brcmanand driver can support using the nand_base driver detected
values.
Signed-off-by: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
---
Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt
index bcda1df..29feaba 100644
--- a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt
+++ b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt
@@ -101,10 +101,10 @@ Required properties:
number (e.g., 0, 1, 2, etc.)
- #address-cells : see partition.txt
- #size-cells : see partition.txt
-- nand-ecc-strength : see nand.txt
-- nand-ecc-step-size : must be 512 or 1024. See nand.txt
Optional properties:
+- nand-ecc-strength : see nand.txt
+- nand-ecc-step-size : must be 512 or 1024. See nand.txt
- nand-on-flash-bbt : boolean, to enable the on-flash BBT for this
chip-select. See nand.txt
- brcm,nand-oob-sector-size : integer, to denote the spare area sector size
--
1.9.0.138.g2de3478
