On 19-05-15 16:51, Priit Laes wrote: > On Thu, May 09, 2019 at 05:58:19PM +0200, Marco Felsch wrote: > > From: Priit Laes <plaes@xxxxxxxxx> > > Cool, thanks for picking that up :) You're welcome ;) Do you have a develboard to test the interfaces I added? Since I don't have it and the kontron guys didn't reply yet. > > Also, another nice thing to see is that Kontron itself is now involved, > as back in the day when I was asking for extra information regarding > this board (latest BSP / Git tree) I was politely told to GTFO ;) Regards, Marco > > > SMARC-sAMX6i is a SMARC (Smart Mobility Architecture) compliant > > module. > > > > Signed-off-by: Priit Laes <plaes@xxxxxxxxx> > > Signed-off-by: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx> > > Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx> > > --- > > Based on patch: https://lore.kernel.org/patchwork/patch/762261/ > > > > v2: > > - common: adapt commit message > > - common: add pengutronix copyright > > - common: use SPDX license header > > - common: rename it to imx6qdl-smx6.dtsi > > - common: drop imx6q.dtsi include and model, compatible, memory properties > > - common: fix comment style > > - common: drop all unnecessary 'status = "disabled"' > > - i2c_pfuze: fix sda/scl gpios > > - i2c_pfuze: s/i2c_pfuze/i2c_intern > > - i2c_pfuze: use GPIO_* defines > > - i2c3: fix pinmux > > - fec: add phy-reset-gpio > > - iomux: drop default 0x80000000 value > > - iomux: use unique naming > > - regulators: drop container node > > - regulators: add all missing > > > > arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi | 418 ++++++++++++++++++ > > 1 file changed, 418 insertions(+) > > create mode 100644 arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi > > > > diff --git a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi > > new file mode 100644 > > index 000000000000..e546d46365f5 > > --- /dev/null > > +++ b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi > > @@ -0,0 +1,418 @@ > > +// SPDX-License-Identifier: GPL-2.0 OR X11 > > +/* > > + * Copyright 2017 (C) Priit Laes <plaes@xxxxxxxxx> > > + * Copyright 2018 (C) Pengutronix, Michael Grzeschik <mgr@xxxxxxxxxxxxxx> > > + * Copyright 2019 (C) Pengutronix, Marco Felsch <kernel@xxxxxxxxxxxxxx> > > + * > > + * Based on initial work by Nikita Yushchenko <nyushchenko at dev.rtsoft.ru> > > + */ > > + > > +#include <dt-bindings/gpio/gpio.h> > > + > > +/ { > > + reg_1p0v_s0: regulator-1p0v-s0 { > > + compatible = "regulator-fixed"; > > + regulator-name = "V_1V0_S0"; > > + regulator-min-microvolt = <1000000>; > > + regulator-max-microvolt = <1000000>; > > + regulator-always-on; > > + regulator-boot-on; > > + vin-supply = <®_smarc_suppy>; > > + }; > > + > > + reg_1p35v_vcoredig_s5: regulator-1p35v-vcoredig-s5 { > > + compatible = "regulator-fixed"; > > + regulator-name = "V_1V35_VCOREDIG_S5"; > > + regulator-min-microvolt = <1350000>; > > + regulator-max-microvolt = <1350000>; > > + regulator-always-on; > > + regulator-boot-on; > > + vin-supply = <®_3p3v_s5>; > > + }; > > + > > + reg_1p8v_s5: regulator-1p8v-s5 { > > + compatible = "regulator-fixed"; > > + regulator-name = "V_1V8_S5"; > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <1800000>; > > + regulator-always-on; > > + regulator-boot-on; > > + vin-supply = <®_3p3v_s5>; > > + }; > > + > > + reg_3p3v_s0: regulator-3p3v-s0 { > > + compatible = "regulator-fixed"; > > + regulator-name = "V_3V3_S0"; > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-always-on; > > + regulator-boot-on; > > + vin-supply = <®_3p3v_s5>; > > + }; > > + > > + reg_3p3v_s0: regulator-3p3v-s0 { > > + compatible = "regulator-fixed"; > > + regulator-name = "V_3V3_S0"; > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-always-on; > > + regulator-boot-on; > > + vin-supply = <®_3p3v_s5>; > > + }; > > + > > + reg_3p3v_s5: regulator-3p3v-s5 { > > + compatible = "regulator-fixed"; > > + regulator-name = "V_3V3_S5"; > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-always-on; > > + regulator-boot-on; > > + vin-supply = <®_smarc_suppy>; > > + }; > > + > > + reg_smarc_rtc: regulator-smarc-rtc { > > + compatible = "regulator-fixed"; > > + regulator-name = "V_IN_RTC_BATT"; > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-always-on; > > + regulator-boot-on; > > + }; > > + > > + /* Module supply range can be 3.00V ... 5.25V */ > > + reg_smarc_suppy: regulator-smarc-supply { > > + compatible = "regulator-fixed"; > > + regulator-name = "V_IN_WIDE"; > > + regulator-min-microvolt = <5000000>; > > + regulator-max-microvolt = <5000000>; > > + regulator-always-on; > > + regulator-boot-on; > > + }; > > + > > + i2c_intern: i2c-gpio-intern { > > + compatible = "i2c-gpio"; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_i2c_gpio_intern>; > > + sda-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; > > + scl-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; > > + i2c-gpio,delay-us = <2>; /* ~100 kHz */ > > + #address-cells = <1>; > > + #size-cells = <0>; > > + }; > > +}; > > + > > +/* CAN0 */ > > +&can1 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_flexcan1>; > > +}; > > + > > +/* CAN1 */ > > +&can2 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_flexcan2>; > > +}; > > + > > +/* GBE */ > > +&fec { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_enet>; > > + phy-mode = "rgmii"; > > + phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; > > +}; > > + > > +&i2c_intern { > > + pfuze100@08 { > > + compatible = "fsl,pfuze100"; > > + reg = <0x08>; > > + > > + regulators { > > + reg_v_core_s0: sw1ab { > > + regulator-name = "V_CORE_S0"; > > + regulator-min-microvolt = <300000>; > > + regulator-max-microvolt = <1875000>; > > + regulator-boot-on; > > + regulator-always-on; > > + }; > > + > > + reg_vddsoc_s0: sw1c { > > + regulator-name = "V_VDDSOC_S0"; > > + regulator-min-microvolt = <300000>; > > + regulator-max-microvolt = <1875000>; > > + regulator-boot-on; > > + regulator-always-on; > > + }; > > + > > + reg_3p15v_s0: sw2 { > > + regulator-name = "V_3V15_S0"; > > + regulator-min-microvolt = <800000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-boot-on; > > + regulator-always-on; > > + }; > > + > > + /* sw3a/b is used in dual mode, but driver does not > > + * support it. Although, there's no need to control > > + * DDR power - so just leaving dummy entries for sw3a > > + * and sw3b for now. > > + */ > > + sw3a { > > + regulator-min-microvolt = <400000>; > > + regulator-max-microvolt = <1975000>; > > + regulator-boot-on; > > + regulator-always-on; > > + }; > > + > > + sw3b { > > + regulator-min-microvolt = <400000>; > > + regulator-max-microvolt = <1975000>; > > + regulator-boot-on; > > + regulator-always-on; > > + }; > > + > > + reg_1p8v_s0: sw4 { > > + regulator-name = "V_1V8_S0"; > > + regulator-min-microvolt = <800000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-boot-on; > > + regulator-always-on; > > + }; > > + > > + /* Regulator for USB */ > > + reg_5p0v_s0: swbst { > > + regulator-name = "V_5V0_S0"; > > + regulator-min-microvolt = <5000000>; > > + regulator-max-microvolt = <5150000>; > > + regulator-boot-on; > > + }; > > + > > + reg_vsnvs: vsnvs { > > + regulator-min-microvolt = <1000000>; > > + regulator-max-microvolt = <3000000>; > > + regulator-boot-on; > > + regulator-always-on; > > + }; > > + > > + reg_vrefddr: vrefddr { > > + regulator-boot-on; > > + regulator-always-on; > > + }; > > + > > + /* > > + * Per schematics, of all VGEN's, only VGEN5 has some > > + * usage ... but even that - over DNI resistor > > + */ > > + vgen1 { > > + regulator-min-microvolt = <800000>; > > + regulator-max-microvolt = <1550000>; > > + }; > > + > > + vgen2 { > > + regulator-min-microvolt = <800000>; > > + regulator-max-microvolt = <1550000>; > > + }; > > + > > + vgen3 { > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <3300000>; > > + }; > > + > > + vgen4 { > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <3300000>; > > + }; > > + > > + reg_2p5v_s0: vgen5 { > > + regulator-name = "V_2V5_S0"; > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <3300000>; > > + }; > > + > > + vgen6 { > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <3300000>; > > + }; > > + }; > > + }; > > +}; > > + > > +/* I2C_PM */ > > +&i2c3 { > > + clock-frequency = <100000>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_i2c3>; > > +}; > > + > > +&iomuxc { > > + pinctrl_flexcan1: flexcan1grp { > > + fsl,pins = < > > + MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0 > > + MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0 > > + >; > > + }; > > + > > + pinctrl_flexcan2: flexcan2grp { > > + fsl,pins = < > > + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0 > > + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0 > > + >; > > + }; > > + > > + pinctrl_enet: enetgrp { > > + fsl,pins = < > > + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 > > + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 > > + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 > > + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 > > + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 > > + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 > > + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 > > + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 > > + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 > > + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 > > + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 > > + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 > > + > > + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 > > + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 > > + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 > > + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 /* RST_GBE0_PHY# */ > > + >; > > + }; > > + > > + pinctrl_i2c_gpio_intern: i2c-gpiointerngrp { > > + fsl,pins = < > > + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 /* SCL */ > > + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* SDA */ > > + >; > > + }; > > + > > + pinctrl_i2c3: i2c3grp { > > + fsl,pins = < > > + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 > > + MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1 > > + >; > > + }; > > + > > + pinctrl_pcie: pciegrp { > > + fsl,pins = < > > + MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x1b0b0 /* PCI_A_PRSNT# */ > > + MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x1b0b0 /* RST_PCIE_A# */ > > + MX6QDL_PAD_SD3_DAT6__GPIO6_IO18 0x1b0b0 /* PCIE_WAKE# */ > > + >; > > + }; > > + > > + pinctrl_uart1: uart1grp { > > + fsl,pins = < > > + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 > > + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 > > + MX6QDL_PAD_EIM_D20__UART1_RTS_B 0x1b0b1 > > + MX6QDL_PAD_EIM_D19__UART1_CTS_B 0x1b0b1 > > + >; > > + }; > > + > > + pinctrl_uart2: uart2grp { > > + fsl,pins = < > > + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 > > + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 > > + >; > > + }; > > + > > + pinctrl_uart4: uart4grp { > > + fsl,pins = < > > + MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1 > > + MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 > > + MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1 > > + MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1 > > + >; > > + }; > > + > > + pinctrl_uart5: uart5grp { > > + fsl,pins = < > > + MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1 > > + MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1 > > + >; > > + }; > > + > > + pinctrl_usbotg: usbotggrp { > > + fsl,pins = < > > + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x1f8b0 > > + /* power, oc muxed but not used by the driver */ > > + MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x1b0b0 /* USB power */ > > + MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b0b0 /* USB OC */ > > + >; > > + }; > > + > > + pinctrl_usdhc4: usdhc4grp { > > + fsl,pins = < > > + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x17059 > > + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 > > + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 > > + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 > > + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 > > + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 > > + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 > > + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 > > + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 > > + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 > > + >; > > + }; > > +}; > > + > > +&pcie { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_pcie>; > > + wake-up-gpio = <&gpio6 18 GPIO_ACTIVE_HIGH>; > > + reset-gpio = <&gpio3 13 GPIO_ACTIVE_HIGH>; > > +}; > > + > > +/* SER0 */ > > +&uart1 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_uart1>; > > + uart-has-rtscts; > > +}; > > + > > +/* SER1 */ > > +&uart2 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_uart2>; > > +}; > > + > > +/* SER2 */ > > +&uart4 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_uart4>; > > + uart-has-rtscts; > > +}; > > + > > +/* SER3 */ > > +&uart5 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_uart5>; > > +}; > > + > > +/* USB0 */ > > +&usbotg { > > + /* > > + * no 'imx6-usb-charger-detection' > > + * since USB_OTG_CHD_B pin is not wired > > + */ > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_usbotg>; > > +}; > > + > > +/* USB1/2 via hub */ > > +&usbh1 { > > + vbus-supply = <®_5p0v_s0>; > > +}; > > + > > +/* SDMMC */ > > +&usdhc4 { > > + /* Internal eMMC, optional on some boards */ > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_usdhc4>; > > + bus-width = <8>; > > + no-1-8-v; > > + non-removable; > > +}; > > -- > > 2.20.1 > > > -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
