Hi Bjorn,
On 5/2/19 3:19 AM, Bjorn Andersson wrote:
> Before introducing the QCS404 platform, which uses the same PCIe
> controller as IPQ4019, migrate this to use the bulk clock API, in order
> to make the error paths slighly cleaner.
>
> Acked-by: Stanimir Varbanov <svarbanov@xxxxxxxxxx>
> Reviewed-by: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> ---
>
> Changes since v2:
> - Defined QCOM_PCIE_2_4_0_MAX_CLOCKS
>
> drivers/pci/controller/dwc/pcie-qcom.c | 49 ++++++++------------------
> 1 file changed, 14 insertions(+), 35 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index 0ed235d560e3..d740cbe0e56d 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -112,10 +112,10 @@ struct qcom_pcie_resources_2_3_2 {
> struct regulator_bulk_data supplies[QCOM_PCIE_2_3_2_MAX_SUPPLY];
> };
>
> +#define QCOM_PCIE_2_4_0_MAX_CLOCKS 3
> struct qcom_pcie_resources_2_4_0 {
> - struct clk *aux_clk;
> - struct clk *master_clk;
> - struct clk *slave_clk;
> + struct clk_bulk_data clks[QCOM_PCIE_2_4_0_MAX_CLOCKS];
> + int num_clks;
> struct reset_control *axi_m_reset;
> struct reset_control *axi_s_reset;
> struct reset_control *pipe_reset;
> @@ -638,18 +638,17 @@ static int qcom_pcie_get_resources_2_4_0(struct qcom_pcie *pcie)
> struct qcom_pcie_resources_2_4_0 *res = &pcie->res.v2_4_0;
> struct dw_pcie *pci = pcie->pci;
> struct device *dev = pci->dev;
> + int ret;
>
> - res->aux_clk = devm_clk_get(dev, "aux");
> - if (IS_ERR(res->aux_clk))
> - return PTR_ERR(res->aux_clk);
> + res->clks[0].id = "aux";
> + res->clks[1].id = "master_bus";
> + res->clks[2].id = "slave_bus";
>
> - res->master_clk = devm_clk_get(dev, "master_bus");
> - if (IS_ERR(res->master_clk))
> - return PTR_ERR(res->master_clk);
> + res->num_clks = 3;
Use the new fresh define QCOM_PCIE_2_4_0_MAX_CLOCKS?
>
> - res->slave_clk = devm_clk_get(dev, "slave_bus");
> - if (IS_ERR(res->slave_clk))
> - return PTR_ERR(res->slave_clk);
> + ret = devm_clk_bulk_get(dev, res->num_clks, res->clks);
> + if (ret < 0)
> + return ret;
>
> res->axi_m_reset = devm_reset_control_get_exclusive(dev, "axi_m");
> if (IS_ERR(res->axi_m_reset))
> @@ -719,9 +718,7 @@ static void qcom_pcie_deinit_2_4_0(struct qcom_pcie *pcie)
> reset_control_assert(res->axi_m_sticky_reset);
> reset_control_assert(res->pwr_reset);
> reset_control_assert(res->ahb_reset);
> - clk_disable_unprepare(res->aux_clk);
> - clk_disable_unprepare(res->master_clk);
> - clk_disable_unprepare(res->slave_clk);
> + clk_bulk_disable_unprepare(res->num_clks, res->clks);
> }
>
> static int qcom_pcie_init_2_4_0(struct qcom_pcie *pcie)
> @@ -850,23 +847,9 @@ static int qcom_pcie_init_2_4_0(struct qcom_pcie *pcie)
>
> usleep_range(10000, 12000);
>
> - ret = clk_prepare_enable(res->aux_clk);
> - if (ret) {
> - dev_err(dev, "cannot prepare/enable iface clock\n");
> + ret = clk_bulk_prepare_enable(res->num_clks, res->clks);
> + if (ret)
> goto err_clk_aux;
Maybe you have to change the name of the label too?
> - }
> -
> - ret = clk_prepare_enable(res->master_clk);
> - if (ret) {
> - dev_err(dev, "cannot prepare/enable core clock\n");
> - goto err_clk_axi_m;
> - }
> -
> - ret = clk_prepare_enable(res->slave_clk);
> - if (ret) {
> - dev_err(dev, "cannot prepare/enable phy clock\n");
> - goto err_clk_axi_s;
> - }
>
> /* enable PCIe clocks and resets */
> val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL);
> @@ -891,10 +874,6 @@ static int qcom_pcie_init_2_4_0(struct qcom_pcie *pcie)
>
> return 0;
>
> -err_clk_axi_s:
> - clk_disable_unprepare(res->master_clk);
> -err_clk_axi_m:
> - clk_disable_unprepare(res->aux_clk);
> err_clk_aux:
> reset_control_assert(res->ahb_reset);
> err_rst_ahb:
>
--
regards,
Stan
