The purpose of this patchset is to add drive-strength support in meson pinconf driver. This is a new feature that was added on the g12a. It is critical for us to support this since many functions are failing with default pad drive-strength. The value achievable by the SoC are 0.5mA, 2.5mA, 3mA and 4mA and the DT property 'drive-strength' is expressed in mA. So this patch add another generic property "drive-strength-microamp". The change to do so would be minimal and could be benefit to other platforms later on. Cheers Guillaume Changes since v5: - restore Tested-by/Reviewed-by/Ack-by tags Changes since v4: - fix dt-binding documentation - rename drive-strength-uA to drive-strength-microamp in coverletter Changes since v3: - remove dev_err in meson_get_drive_strength - cleanup code Changes since v2: - rename driver-strength-uA property to drive-strength-microamp - rework patch series for better understanding - rework set_bias function Changes since v1: - fix missing break - implement new pinctrl generic property "drive-strength-uA" [1] https://lkml.kernel.org/r/20190314163725.7918-1-jbrunet@xxxxxxxxxxxx Tested-by: Jerome Brunet <jbrunet@xxxxxxxxxxxx> Guillaume La Roque (6): dt-bindings: pinctrl: add a 'drive-strength-microamp' property pinctrl: generic: add new 'drive-strength-microamp' property support dt-bindings: pinctrl: meson: Add drive-strength-microamp property pinctrl: meson: Rework enable/disable bias part pinctrl: meson: add support of drive-strength-microamp pinctrl: meson: g12a: add DS bank value .../bindings/pinctrl/meson,pinctrl.txt | 4 + .../bindings/pinctrl/pinctrl-bindings.txt | 3 + drivers/pinctrl/meson/pinctrl-meson-g12a.c | 36 ++-- drivers/pinctrl/meson/pinctrl-meson.c | 180 ++++++++++++++---- drivers/pinctrl/meson/pinctrl-meson.h | 18 +- drivers/pinctrl/pinconf-generic.c | 2 + include/linux/pinctrl/pinconf-generic.h | 3 + 7 files changed, 193 insertions(+), 53 deletions(-) -- 2.17.1
