On Fri, 2019-05-10 at 15:45 -0700, Kevin Hilman wrote: > Jerome Brunet <jbrunet@xxxxxxxxxxxx> writes: > > > Enable the network interface of the SEI510 which use the internal PHY. > > > > Signed-off-by: Jerome Brunet <jbrunet@xxxxxxxxxxxx> > > I tried testing this series on SEI510, but I must still be missing some > defconfig options, as the default defconfig doesn't lead to a working > interface. That's weird. AFAICT, the net part has hit Linus's tree. You should have everything needed by default, the mdio mux has > default m if ARCH_MESON > > > I tried adding this kconfig fragment[1], and the dwmac probes/inits but > I must still be missing something, as the dwmac is still failing to find > a PHY. Boot log: https://termbin.com/ivf3 > > I have the same result testing on the u200. I don't any other patch pending for the network of the g12a. Maybe I've done something wrong while rebasing. I'll check on monday. > > Kevin > > [1] amlogic network kconfig fragment > CONFIG_STMMAC_ETH=y > > # following are needed, but automatically enabled if above is set > #CONFIG_STMMAC_PLATFORM=m > #CONFIG_DWMAC_MESON=m > > CONFIG_PHYLIB=y > CONFIG_MICREL_PHY=y > CONFIG_REALTEK_PHY=y > > CONFIG_MDIO_BUS_MUX_MESON_G12A=y > CONFIG_MESON_GXL_PHY=y
