Re: [PATCH v2] arm64: dts: sdm845: Add PSCI cpuidle low power states

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, May 8, 2019 at 3:50 AM Amit Kucheria
<amit.kucheria@xxxxxxxxxxxxx> wrote:
>
> On Tue, Oct 30, 2018 at 10:53 PM Raju P.L.S.S.S.N
> <rplsssn@xxxxxxxxxxxxxx> wrote:
> >
> > Add device bindings for cpuidle states for cpu devices.
>
> Raju: Did this patch fall through the cracks? It would be nice to land
> this while Lina works on setting up the infrastructure to do
> hierarchical power domains.

After talking offline with Raju, I've added this patch with some
cleanups to my qcom cpuidle series.

> > Cc: <devicetree@xxxxxxxxxxxxxxx>
> > Signed-off-by: Raju P.L.S.S.S.N <rplsssn@xxxxxxxxxxxxxx>
> > ---
> > Changes in v2
> >  - Address comments from Doug
> > ---
> > ---
> >  arch/arm64/boot/dts/qcom/sdm845.dtsi | 62 ++++++++++++++++++++++++++++++++++++
> >  1 file changed, 62 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> > index 0c9a2aa..3a8381e 100644
> > --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> > @@ -96,6 +96,7 @@
> >                         reg = <0x0 0x0>;
> >                         enable-method = "psci";
> >                         next-level-cache = <&L2_0>;
> > +                       cpu-idle-states = <&C0_CPU_PD &C0_CPU_RPD &CLUSTER_PD>;
>
> May I suggest using more generic names here instead of C0_CPU_PD and
> move the QC-specific description to the idle-state-name property? C0
> and C4 isn't easy to understand at a glance. Neither is PD and RPD.
>
> Something like big_cpu_retention, big_cpu_sleep, little_cpu_retention,
> little_cpu_sleep, cluster_sleep?
> Or big_cpu_idle_0, big_cpu_idle_1, big_cpu_idle_2 for states with
> increasing breakeven times.
>
> I've commented below on what it might look like.
>
> >                         L2_0: l2-cache {
> >                                 compatible = "cache";
> >                                 next-level-cache = <&L3_0>;
> > @@ -111,6 +112,7 @@
> >                         reg = <0x0 0x100>;
> >                         enable-method = "psci";
> >                         next-level-cache = <&L2_100>;
> > +                       cpu-idle-states = <&C0_CPU_PD &C0_CPU_RPD &CLUSTER_PD>;
> >                         L2_100: l2-cache {
> >                                 compatible = "cache";
> >                                 next-level-cache = <&L3_0>;
> > @@ -123,6 +125,7 @@
> >                         reg = <0x0 0x200>;
> >                         enable-method = "psci";
> >                         next-level-cache = <&L2_200>;
> > +                       cpu-idle-states = <&C0_CPU_PD &C0_CPU_RPD &CLUSTER_PD>;
> >                         L2_200: l2-cache {
> >                                 compatible = "cache";
> >                                 next-level-cache = <&L3_0>;
> > @@ -135,6 +138,7 @@
> >                         reg = <0x0 0x300>;
> >                         enable-method = "psci";
> >                         next-level-cache = <&L2_300>;
> > +                       cpu-idle-states = <&C0_CPU_PD &C0_CPU_RPD &CLUSTER_PD>;
> >                         L2_300: l2-cache {
> >                                 compatible = "cache";
> >                                 next-level-cache = <&L3_0>;
> > @@ -147,6 +151,7 @@
> >                         reg = <0x0 0x400>;
> >                         enable-method = "psci";
> >                         next-level-cache = <&L2_400>;
> > +                       cpu-idle-states = <&C4_CPU_PD &C4_CPU_RPD &CLUSTER_PD>;
> >                         L2_400: l2-cache {
> >                                 compatible = "cache";
> >                                 next-level-cache = <&L3_0>;
> > @@ -159,6 +164,7 @@
> >                         reg = <0x0 0x500>;
> >                         enable-method = "psci";
> >                         next-level-cache = <&L2_500>;
> > +                       cpu-idle-states = <&C4_CPU_PD &C4_CPU_RPD &CLUSTER_PD>;
> >                         L2_500: l2-cache {
> >                                 compatible = "cache";
> >                                 next-level-cache = <&L3_0>;
> > @@ -171,6 +177,7 @@
> >                         reg = <0x0 0x600>;
> >                         enable-method = "psci";
> >                         next-level-cache = <&L2_600>;
> > +                       cpu-idle-states = <&C4_CPU_PD &C4_CPU_RPD &CLUSTER_PD>;
> >                         L2_600: l2-cache {
> >                                 compatible = "cache";
> >                                 next-level-cache = <&L3_0>;
> > @@ -183,11 +190,66 @@
> >                         reg = <0x0 0x700>;
> >                         enable-method = "psci";
> >                         next-level-cache = <&L2_700>;
> > +                       cpu-idle-states = <&C4_CPU_PD &C4_CPU_RPD &CLUSTER_PD>;
> >                         L2_700: l2-cache {
> >                                 compatible = "cache";
> >                                 next-level-cache = <&L3_0>;
> >                         };
> >                 };
> > +
> > +               idle-states {
> > +                       entry-method = "psci";
> > +
> > +                       C0_CPU_PD: c0-power-down {
>
> big_cpu_retention: big-cpu-retention
>
> > +                               compatible = "arm,idle-state";
> > +                               arm,psci-suspend-param = <0x40000003>;
> > +                               entry-latency-us = <350>;
> > +                               exit-latency-us = <461>;
> > +                               min-residency-us = <1890>;
> > +                               local-timer-stop;
> > +                               idle-state-name = "power-down";
>
> "big-cpu-power-down"
>
> > +                       };
> > +
> > +                       C0_CPU_RPD: c0-rail-power-down {
>
> big_cpu_sleep: big-cpu-sleep
>
> > +                               compatible = "arm,idle-state";
> > +                               arm,psci-suspend-param = <0x40000004>;
> > +                               entry-latency-us = <360>;
> > +                               exit-latency-us = <531>;
> > +                               min-residency-us = <3934>;
> > +                               local-timer-stop;
> > +                               idle-state-name = "rail-power-down";
>
> "big-cpu-rail-power-down"
>
> > +                       };
> > +
> > +                       C4_CPU_PD: c4-power-down {
>
> little_cpu_retention: little-cpu-retention
>
> > +                               compatible = "arm,idle-state";
> > +                               arm,psci-suspend-param = <0x40000003>;
> > +                               entry-latency-us = <264>;
> > +                               exit-latency-us = <621>;
> > +                               min-residency-us = <952>;
> > +                               local-timer-stop;
> > +                               idle-state-name = "power-down";
>
> "little-cpu-power-down" and so and so forth. You get the idea.
>
> > +                       };
> > +
> > +                       C4_CPU_RPD: c4-rail-power-down {
> > +                               compatible = "arm,idle-state";
> > +                               arm,psci-suspend-param = <0x40000004>;
> > +                               entry-latency-us = <702>;
> > +                               exit-latency-us = <1061>;
> > +                               min-residency-us = <4488>;
> > +                               local-timer-stop;
> > +                               idle-state-name = "rail-power-down";
> > +                       };
> > +
> > +                       CLUSTER_PD: cluster-power-down {
> > +                               compatible = "arm,idle-state";
> > +                               arm,psci-suspend-param = <0x400000F4>;
> > +                               entry-latency-us = <3263>;
> > +                               exit-latency-us = <6562>;
> > +                               min-residency-us = <9987>;
> > +                               local-timer-stop;
> > +                               idle-state-name = "cluster-power-down";
> > +                       };
> > +               };
> >         };
> >
> >         pmu {
> > --
> > QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> > of the Code Aurora Forum, hosted by The Linux Foundation.
> >



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux