Add support according the SMARC Spec 1.1 [1] and provided schematics. Due to the lack of hardware the interface can't be tested right now. Kontron don't route all of these pins to the i.MX6, some are routed to the SoM CPLD. [1] https://sget.org/standards/smarc Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx> --- arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi index 577048f96f22..7a32767c35f1 100644 --- a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi @@ -321,6 +321,9 @@ }; &iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mgmt_gpios>; + pinctrl_ecspi4: ecspi4grp { fsl,pins = < MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1 @@ -437,6 +440,20 @@ >; }; + pinctrl_mgmt_gpios: mgmt-gpiosgrp { + fsl,pins = < + MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x1b0b0 /* LID# */ + MX6QDL_PAD_SD3_DAT7__GPIO6_IO17 0x1b0b0 /* SLEEP# */ + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 /* CHARGING# */ + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 /* CHARGER_PRSNT# */ + MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x1b0b0 /* CARRIER_STBY# */ + MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x1b0b0 /* BATLOW# */ + MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x1b0b0 /* TEST# */ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 /* VDD_IO_SEL_D# */ + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0 /* POWER_BTN# */ + >; + }; + pinctrl_pcie: pciegrp { fsl,pins = < MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x1b0b0 /* PCI_A_PRSNT# */ -- 2.20.1
