Hi Chrisさん
Thank you for the patch!
> From: Chris Brandt, Sent: Tuesday, May 7, 2019 8:46 AM
>
> When not using OTG, the PHY will need to know if it should function as
> host or peripheral by checking dr_mode in the PHY node (not the parent
> controller node).
>
> Signed-off-by: Chris Brandt <chris.brandt@xxxxxxxxxxx>
> ---
> drivers/phy/renesas/phy-rcar-gen3-usb2.c | 8 +++++++-
> 1 file changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
> index 218b32e458cb..4eaa228ebd30 100644
> --- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c
> +++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
> @@ -408,7 +408,12 @@ static int rcar_gen3_phy_usb2_init(struct phy *p)
> if (rcar_gen3_needs_init_otg(channel))
> rcar_gen3_init_otg(channel);
> rphy->otg_initialized = true;
> - }
> + } else
As Sergei-san said, this should be "} else {"
> + /* Not OTG, so dr_mode should be set in PHY node */
> + if (usb_get_dr_mode(channel->dev) == USB_DR_MODE_PERIPHERAL)
> + writel(0x80000000, usb2_base + USB2_COMMCTRL);
> + else
I would like to add "else if usb_get_dr_mode(channel->dev) == USB_DR_MODE_HOST)"
for a PHY node without "dr_mode" property. In other words, if the PHY node
doesn't have dr_mode property like R-Car, this condition can be the same behavior as previous.
> + writel(0x00000000, usb2_base + USB2_COMMCTRL);
>
> rphy->initialized = true;
>
> @@ -638,6 +643,7 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
> if (of_property_read_bool(dev->of_node, "renesas,uses_usb_x1"))
> channel->uses_usb_x1 = true;
>
> +
As Sergei-san said, this is not needed :)
Best regards,
Yoshihiro Shimoda
