On Fri, May 3, 2019 at 9:27 AM Petr Štetiar <ynezz@xxxxxxx> wrote: > > As of_get_mac_address now supports NVMEM under the hood, we need to update > the bindings documentation with the new nvmem-cell* properties, which would > mean copy&pasting a lot of redundant information to every binding > documentation currently referencing some of the MAC address properties. > > So I've just removed all the references to the optional MAC address > properties and replaced them with the small note referencing > net/ethernet.txt file. > > Signed-off-by: Petr Štetiar <ynezz@xxxxxxx> > --- > > Changes since v2: > > * replaced only MAC address related optional properties with a text > referencing ethernet.txt > > Documentation/devicetree/bindings/net/altera_tse.txt | 5 ++--- > Documentation/devicetree/bindings/net/amd-xgbe.txt | 5 +++-- > Documentation/devicetree/bindings/net/brcm,amac.txt | 4 ++-- > Documentation/devicetree/bindings/net/cpsw.txt | 4 +++- > Documentation/devicetree/bindings/net/davinci_emac.txt | 5 +++-- > Documentation/devicetree/bindings/net/dsa/dsa.txt | 5 ++--- > Documentation/devicetree/bindings/net/ethernet.txt | 6 ++++-- > Documentation/devicetree/bindings/net/hisilicon-femac.txt | 4 +++- > .../devicetree/bindings/net/hisilicon-hix5hd2-gmac.txt | 4 +++- > Documentation/devicetree/bindings/net/keystone-netcp.txt | 10 +++++----- > Documentation/devicetree/bindings/net/macb.txt | 5 ++--- > Documentation/devicetree/bindings/net/marvell-pxa168.txt | 4 +++- > Documentation/devicetree/bindings/net/microchip,enc28j60.txt | 3 ++- > Documentation/devicetree/bindings/net/microchip,lan78xx.txt | 5 ++--- > Documentation/devicetree/bindings/net/qca,qca7000.txt | 4 +++- > Documentation/devicetree/bindings/net/samsung-sxgbe.txt | 4 +++- > .../devicetree/bindings/net/snps,dwc-qos-ethernet.txt | 5 +++-- > .../devicetree/bindings/net/socionext,uniphier-ave4.txt | 4 ++-- > Documentation/devicetree/bindings/net/socionext-netsec.txt | 5 +++-- > .../devicetree/bindings/net/wireless/mediatek,mt76.txt | 5 +++-- > Documentation/devicetree/bindings/net/wireless/qca,ath9k.txt | 4 ++-- > 21 files changed, 58 insertions(+), 42 deletions(-) [...] > diff --git a/Documentation/devicetree/bindings/net/keystone-netcp.txt b/Documentation/devicetree/bindings/net/keystone-netcp.txt > index 04ba1dc..3a65aab 100644 > --- a/Documentation/devicetree/bindings/net/keystone-netcp.txt > +++ b/Documentation/devicetree/bindings/net/keystone-netcp.txt > @@ -135,14 +135,14 @@ Optional properties: > are swapped. The netcp driver will swap the two DWORDs > back to the proper order when this property is set to 2 > when it obtains the mac address from efuse. > -- local-mac-address: the driver is designed to use the of_get_mac_address api > - only if efuse-mac is 0. When efuse-mac is 0, the MAC > - address is obtained from local-mac-address. If this > - attribute is not present, then the driver will use a > - random MAC address. > - "netcp-device label": phandle to the device specification for each of NetCP > sub-module attached to this interface. > > +The MAC address will be determined using the optional properties defined in > +ethernet.txt, as provided by the of_get_mac_address API and only if efuse-mac Don't make references to Linux in bindings. You can talk about expectations of client programs (e.g Linux, u-boot, BSD, etc.) though. Rob
