Hi Lukasz, On 19. 5. 7. 오전 12:11, Lukasz Luba wrote: > Define new IDs for clocks used by Dynamic Memory Controller in > Exynos5422 SoC. > > Acked-by: Rob Herring <robh@xxxxxxxxxx> > Signed-off-by: Lukasz Luba <l.luba@xxxxxxxxxxxxxxxxxxx> > --- > include/dt-bindings/clock/exynos5420.h | 28 ++++++++++++++++++++++------ > 1 file changed, 22 insertions(+), 6 deletions(-) > > diff --git a/include/dt-bindings/clock/exynos5420.h b/include/dt-bindings/clock/exynos5420.h > index 355f469..bf50d8a 100644 > --- a/include/dt-bindings/clock/exynos5420.h > +++ b/include/dt-bindings/clock/exynos5420.h > @@ -60,6 +60,7 @@ > #define CLK_MAU_EPLL 159 > #define CLK_SCLK_HSIC_12M 160 > #define CLK_SCLK_MPHY_IXTAL24 161 > +#define CLK_SCLK_BPLL 162 > > /* gate clocks */ > #define CLK_UART0 257 > @@ -195,6 +196,16 @@ > #define CLK_ACLK432_CAM 518 > #define CLK_ACLK_FL1550_CAM 519 > #define CLK_ACLK550_CAM 520 > +#define CLK_CLKM_PHY0 521 > +#define CLK_CLKM_PHY1 522 > +#define CLK_ACLK_PPMU_DREX0_0 523 > +#define CLK_ACLK_PPMU_DREX0_1 524 > +#define CLK_ACLK_PPMU_DREX1_0 525 > +#define CLK_ACLK_PPMU_DREX1_1 526 > +#define CLK_PCLK_PPMU_DREX0_0 527 > +#define CLK_PCLK_PPMU_DREX0_1 528 > +#define CLK_PCLK_PPMU_DREX1_0 529 > +#define CLK_PCLK_PPMU_DREX1_1 530 > > /* mux clocks */ > #define CLK_MOUT_HDMI 640 > @@ -217,6 +228,8 @@ > #define CLK_MOUT_EPLL 657 > #define CLK_MOUT_MAU_EPLL 658 > #define CLK_MOUT_USER_MAU_EPLL 659 > +#define CLK_MOUT_SCLK_SPLL 660 > +#define CLK_MOUT_MX_MSPLL_CCORE_PHY 661 > > /* divider clocks */ > #define CLK_DOUT_PIXEL 768 > @@ -243,13 +256,16 @@ > #define CLK_DOUT_ACLK300_GSCL 789 > #define CLK_DOUT_ACLK400_DISP1 790 > #define CLK_DOUT_PCLK_CDREX 791 > -#define CLK_DOUT_SCLK_CDREX 792 > -#define CLK_DOUT_ACLK_CDREX1 793 > -#define CLK_DOUT_CCLK_DREX0 794 > -#define CLK_DOUT_CLK2X_PHY0 795 > -#define CLK_DOUT_PCLK_CORE_MEM 796 The your previous patch didn't change the id number of already exiting clocks. It cause the fault. In order to keep the compatibility, you keep the original id number without modification. Please don't change the id number of the existing clocks and then just add the new clocks. > +#define CLK_DOUT_PCLK_DREX0 792 > +#define CLK_DOUT_PCLK_DREX1 793 > +#define CLK_DOUT_SCLK_CDREX 794 > +#define CLK_DOUT_ACLK_CDREX1 795 > +#define CLK_DOUT_CCLK_DREX0 796 > +#define CLK_DOUT_CLK2X_PHY0 797 > +#define CLK_DOUT_PCLK_CORE_MEM 798 > +#define CLK_FF_DOUT_SPLL2 799 > > /* must be greater than maximal clock id */ > -#define CLK_NR_CLKS 797 > +#define CLK_NR_CLKS 800 > > #endif /* _DT_BINDINGS_CLOCK_EXYNOS_5420_H */ > -- Best Regards, Chanwoo Choi Samsung Electronics
