From: Petr Štetiar <ynezz@xxxxxxx>
[ Upstream commit 36ad7022536e0c65f8baeeaa5efde11dec44808a ]
I've discovered following discrepancy in the bindings/net/ethernet.txt
documentation, where it states following:
- nvmem-cells: phandle, reference to an nvmem node for the MAC address;
- nvmem-cell-names: string, should be "mac-address" if nvmem is to be..
which is actually misleading and confusing. There are only two ethernet
drivers in the tree, cadence/macb and davinci which supports this
properties.
This nvmem-cell* properties were introduced in commit 9217e566bdee
("of_net: Implement of_get_nvmem_mac_address helper"), but
commit afa64a72b862 ("of: net: kill of_get_nvmem_mac_address()")
forget to properly clean up this parts.
So this patch fixes the documentation by moving the nvmem-cell*
properties at the appropriate places. While at it, I've removed unused
include as well.
Cc: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
Fixes: afa64a72b862 ("of: net: kill of_get_nvmem_mac_address()")
Signed-off-by: Petr Štetiar <ynezz@xxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
Documentation/devicetree/bindings/net/davinci_emac.txt | 2 ++
Documentation/devicetree/bindings/net/ethernet.txt | 2 --
Documentation/devicetree/bindings/net/macb.txt | 4 ++++
drivers/of/of_net.c | 1 -
4 files changed, 6 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/davinci_emac.txt b/Documentation/devicetree/bindings/net/davinci_emac.txt
index 24c5cdaba8d2..ca83dcc84fb8 100644
--- a/Documentation/devicetree/bindings/net/davinci_emac.txt
+++ b/Documentation/devicetree/bindings/net/davinci_emac.txt
@@ -20,6 +20,8 @@ Required properties:
Optional properties:
- phy-handle: See ethernet.txt file in the same directory.
If absent, davinci_emac driver defaults to 100/FULL.
+- nvmem-cells: phandle, reference to an nvmem node for the MAC address
+- nvmem-cell-names: string, should be "mac-address" if nvmem is to be used
- ti,davinci-rmii-en: 1 byte, 1 means use RMII
- ti,davinci-no-bd-ram: boolean, does EMAC have BD RAM?
diff --git a/Documentation/devicetree/bindings/net/ethernet.txt b/Documentation/devicetree/bindings/net/ethernet.txt
index cfc376bc977a..2974e63ba311 100644
--- a/Documentation/devicetree/bindings/net/ethernet.txt
+++ b/Documentation/devicetree/bindings/net/ethernet.txt
@@ -10,8 +10,6 @@ Documentation/devicetree/bindings/phy/phy-bindings.txt.
the boot program; should be used in cases where the MAC address assigned to
the device by the boot program is different from the "local-mac-address"
property;
-- nvmem-cells: phandle, reference to an nvmem node for the MAC address;
-- nvmem-cell-names: string, should be "mac-address" if nvmem is to be used;
- max-speed: number, specifies maximum speed in Mbit/s supported by the device;
- max-frame-size: number, maximum transfer unit (IEEE defined MTU), rather than
the maximum frame size (there's contradiction in the Devicetree
diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt
index 3e17ac1d5d58..1a914116f4c2 100644
--- a/Documentation/devicetree/bindings/net/macb.txt
+++ b/Documentation/devicetree/bindings/net/macb.txt
@@ -26,6 +26,10 @@ Required properties:
Optional elements: 'tsu_clk'
- clocks: Phandles to input clocks.
+Optional properties:
+- nvmem-cells: phandle, reference to an nvmem node for the MAC address
+- nvmem-cell-names: string, should be "mac-address" if nvmem is to be used
+
Optional properties for PHY child node:
- reset-gpios : Should specify the gpio for phy reset
- magic-packet : If present, indicates that the hardware supports waking
diff --git a/drivers/of/of_net.c b/drivers/of/of_net.c
index 810ab0fbcccb..d820f3edd431 100644
--- a/drivers/of/of_net.c
+++ b/drivers/of/of_net.c
@@ -7,7 +7,6 @@
*/
#include <linux/etherdevice.h>
#include <linux/kernel.h>
-#include <linux/nvmem-consumer.h>
#include <linux/of_net.h>
#include <linux/phy.h>
#include <linux/export.h>
--
2.20.1
