Oi Fabio, On Sat 04 May 2019 at 15:40, Fabio Estevam wrote: > As per the i.MX7D Reference Manual only the MCLK is used for > the CSI block, so only document this single clock. > > Signed-off-by: Fabio Estevam <festevam@xxxxxxxxx> You missed to add a cover-letter to the series, but I have tested it and reviewed on top of Steve series [0] and everything looks good. Thanks for fixes. For the all series: Tested-by: Rui Miguel Silva <rmfrfs@xxxxxxxxx> Reviewed-by: Rui Miguel Silva <rmfrfs@xxxxxxxxx> --- Cheers, Rui [0]: https://lore.kernel.org/linux-media/20190503224326.21039-1-slongerbeam@xxxxxxxxx/ > --- > Documentation/devicetree/bindings/media/imx7-csi.txt | 9 +++------ > 1 file changed, 3 insertions(+), 6 deletions(-) > > diff --git a/Documentation/devicetree/bindings/media/imx7-csi.txt b/Documentation/devicetree/bindings/media/imx7-csi.txt > index 3c07bc676bc3..443aef07356e 100644 > --- a/Documentation/devicetree/bindings/media/imx7-csi.txt > +++ b/Documentation/devicetree/bindings/media/imx7-csi.txt > @@ -14,8 +14,7 @@ Required properties: > - interrupts : should contain CSI interrupt; > - clocks : list of clock specifiers, see > Documentation/devicetree/bindings/clock/clock-bindings.txt for details; > -- clock-names : must contain "axi", "mclk" and "dcic" entries, matching > - entries in the clock property; > +- clock-names : must contain "mclk"; > > The device node shall contain one 'port' child node with one child 'endpoint' > node, according to the bindings defined in: > @@ -32,10 +31,8 @@ example: > compatible = "fsl,imx7-csi"; > reg = <0x30710000 0x10000>; > interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&clks IMX7D_CLK_DUMMY>, > - <&clks IMX7D_CSI_MCLK_ROOT_CLK>, > - <&clks IMX7D_CLK_DUMMY>; > - clock-names = "axi", "mclk", "dcic"; > + clocks = <&clks IMX7D_CSI_MCLK_ROOT_CLK>; > + clock-names = "mclk"; > > port { > csi_from_csi_mux: endpoint {
