On Fri, May 03, 2019 at 03:48:26PM +0200, Ludovic Barre wrote:
> From: Ludovic Barre <ludovic.barre@xxxxxx>
>
> This patch allows to define the max prescaler by compatible.
> To set a large range of timeout, the prescaler should be set
> dynamically (from the timeout request) to improve the resolution
> in order to have a timeout close to the expected value.
>
> Signed-off-by: Ludovic Barre <ludovic.barre@xxxxxx>
Reviewed-by: Guenter Roeck <linux@xxxxxxxxxxxx>
> ---
> drivers/watchdog/stm32_iwdg.c | 84 ++++++++++++++++++++++++-------------------
> 1 file changed, 47 insertions(+), 37 deletions(-)
>
> diff --git a/drivers/watchdog/stm32_iwdg.c b/drivers/watchdog/stm32_iwdg.c
> index 6f7c2bc..d569a36 100644
> --- a/drivers/watchdog/stm32_iwdg.c
> +++ b/drivers/watchdog/stm32_iwdg.c
> @@ -34,36 +34,44 @@
> #define KR_KEY_EWA 0x5555 /* write access enable */
> #define KR_KEY_DWA 0x0000 /* write access disable */
>
> -/* IWDG_PR register bit values */
> -#define PR_4 0x00 /* prescaler set to 4 */
> -#define PR_8 0x01 /* prescaler set to 8 */
> -#define PR_16 0x02 /* prescaler set to 16 */
> -#define PR_32 0x03 /* prescaler set to 32 */
> -#define PR_64 0x04 /* prescaler set to 64 */
> -#define PR_128 0x05 /* prescaler set to 128 */
> -#define PR_256 0x06 /* prescaler set to 256 */
> +/* IWDG_PR register */
> +#define PR_SHIFT 2
> +#define PR_MIN BIT(PR_SHIFT)
>
> /* IWDG_RLR register values */
> -#define RLR_MIN 0x07C /* min value supported by reload register */
> -#define RLR_MAX 0xFFF /* max value supported by reload register */
> +#define RLR_MIN 0x2 /* min value recommended */
> +#define RLR_MAX GENMASK(11, 0) /* max value of reload register */
>
> /* IWDG_SR register bit mask */
> -#define FLAG_PVU BIT(0) /* Watchdog prescaler value update */
> -#define FLAG_RVU BIT(1) /* Watchdog counter reload value update */
> +#define SR_PVU BIT(0) /* Watchdog prescaler value update */
> +#define SR_RVU BIT(1) /* Watchdog counter reload value update */
>
> /* set timeout to 100000 us */
> #define TIMEOUT_US 100000
> #define SLEEP_US 1000
>
> -#define HAS_PCLK true
> +struct stm32_iwdg_data {
> + bool has_pclk;
> + u32 max_prescaler;
> +};
> +
> +static const struct stm32_iwdg_data stm32_iwdg_data = {
> + .has_pclk = false,
> + .max_prescaler = 256,
> +};
> +
> +static const struct stm32_iwdg_data stm32mp1_iwdg_data = {
> + .has_pclk = true,
> + .max_prescaler = 1024,
> +};
>
> struct stm32_iwdg {
> struct watchdog_device wdd;
> + const struct stm32_iwdg_data *data;
> void __iomem *regs;
> struct clk *clk_lsi;
> struct clk *clk_pclk;
> unsigned int rate;
> - bool has_pclk;
> };
>
> static inline u32 reg_read(void __iomem *base, u32 reg)
> @@ -79,31 +87,35 @@ static inline void reg_write(void __iomem *base, u32 reg, u32 val)
> static int stm32_iwdg_start(struct watchdog_device *wdd)
> {
> struct stm32_iwdg *wdt = watchdog_get_drvdata(wdd);
> - u32 val = FLAG_PVU | FLAG_RVU;
> - u32 reload;
> + u32 tout, presc, iwdg_rlr, iwdg_pr, iwdg_sr;
> int ret;
>
> dev_dbg(wdd->parent, "%s\n", __func__);
>
> - /* prescaler fixed to 256 */
> - reload = clamp_t(unsigned int, ((wdd->timeout * wdt->rate) / 256) - 1,
> - RLR_MIN, RLR_MAX);
> + tout = clamp_t(unsigned int, wdd->timeout,
> + wdd->min_timeout, wdd->max_hw_heartbeat_ms / 1000);
> +
> + presc = DIV_ROUND_UP(tout * wdt->rate, RLR_MAX + 1);
> +
> + /* The prescaler is align on power of 2 and start at 2 ^ PR_SHIFT. */
> + presc = roundup_pow_of_two(presc);
> + iwdg_pr = presc <= 1 << PR_SHIFT ? 0 : ilog2(presc) - PR_SHIFT;
> + iwdg_rlr = ((tout * wdt->rate) / presc) - 1;
>
> /* enable write access */
> reg_write(wdt->regs, IWDG_KR, KR_KEY_EWA);
>
> /* set prescaler & reload registers */
> - reg_write(wdt->regs, IWDG_PR, PR_256); /* prescaler fix to 256 */
> - reg_write(wdt->regs, IWDG_RLR, reload);
> + reg_write(wdt->regs, IWDG_PR, iwdg_pr);
> + reg_write(wdt->regs, IWDG_RLR, iwdg_rlr);
> reg_write(wdt->regs, IWDG_KR, KR_KEY_ENABLE);
>
> /* wait for the registers to be updated (max 100ms) */
> - ret = readl_relaxed_poll_timeout(wdt->regs + IWDG_SR, val,
> - !(val & (FLAG_PVU | FLAG_RVU)),
> + ret = readl_relaxed_poll_timeout(wdt->regs + IWDG_SR, iwdg_sr,
> + !(iwdg_sr & (SR_PVU | SR_RVU)),
> SLEEP_US, TIMEOUT_US);
> if (ret) {
> - dev_err(wdd->parent,
> - "Fail to set prescaler or reload registers\n");
> + dev_err(wdd->parent, "Fail to set prescaler, reload regs\n");
> return ret;
> }
>
> @@ -156,7 +168,7 @@ static int stm32_iwdg_clk_init(struct platform_device *pdev,
> }
>
> /* optional peripheral clock */
> - if (wdt->has_pclk) {
> + if (wdt->data->has_pclk) {
> wdt->clk_pclk = devm_clk_get(dev, "pclk");
> if (IS_ERR(wdt->clk_pclk)) {
> dev_err(dev, "Unable to get pclk clock\n");
> @@ -205,8 +217,8 @@ static const struct watchdog_ops stm32_iwdg_ops = {
> };
>
> static const struct of_device_id stm32_iwdg_of_match[] = {
> - { .compatible = "st,stm32-iwdg", .data = (void *)!HAS_PCLK },
> - { .compatible = "st,stm32mp1-iwdg", .data = (void *)HAS_PCLK },
> + { .compatible = "st,stm32-iwdg", .data = &stm32_iwdg_data },
> + { .compatible = "st,stm32mp1-iwdg", .data = &stm32mp1_iwdg_data },
> { /* end node */ }
> };
> MODULE_DEVICE_TABLE(of, stm32_iwdg_of_match);
> @@ -215,19 +227,16 @@ static int stm32_iwdg_probe(struct platform_device *pdev)
> {
> struct device *dev = &pdev->dev;
> struct watchdog_device *wdd;
> - const struct of_device_id *match;
> struct stm32_iwdg *wdt;
> int ret;
>
> - match = of_match_device(stm32_iwdg_of_match, dev);
> - if (!match)
> - return -ENODEV;
> -
> wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL);
> if (!wdt)
> return -ENOMEM;
>
> - wdt->has_pclk = match->data;
> + wdt->data = of_device_get_match_data(&pdev->dev);
> + if (!wdt->data)
> + return -ENODEV;
>
> /* This is the timer base. */
> wdt->regs = devm_platform_ioremap_resource(pdev, 0);
> @@ -242,11 +251,12 @@ static int stm32_iwdg_probe(struct platform_device *pdev)
>
> /* Initialize struct watchdog_device. */
> wdd = &wdt->wdd;
> + wdd->parent = dev;
> wdd->info = &stm32_iwdg_info;
> wdd->ops = &stm32_iwdg_ops;
> - wdd->min_timeout = ((RLR_MIN + 1) * 256) / wdt->rate;
> - wdd->max_hw_heartbeat_ms = ((RLR_MAX + 1) * 256 * 1000) / wdt->rate;
> - wdd->parent = dev;
> + wdd->min_timeout = DIV_ROUND_UP((RLR_MIN + 1) * PR_MIN, wdt->rate);
> + wdd->max_hw_heartbeat_ms = ((RLR_MAX + 1) * wdt->data->max_prescaler *
> + 1000) / wdt->rate;
>
> watchdog_set_drvdata(wdd, wdt);
> watchdog_set_nowayout(wdd, WATCHDOG_NOWAYOUT);
> --
> 2.7.4
>
