It has been a while since the last update, but here is v5 of the Allegro DVT
H.264 encoder found in the EV family of the Xilinx ZynqMP platform.
Patch 3 ("media: dt-bindings: media: Add vendor prefix for allegro") is new
and adds the Allegro DVT vendor prefix.
The biggest change is a pretty much rewrite of the NAL unit RBSP generator
code. I dropped the macros that were used for error handling and added an
error field to the rbsp struct to signal an error while writing or reading the
RBSP. Furthermore, the struct now contains function pointers for handling
different encodings (bit, bits, uev, sev) that are used in the RBSP. This
allows to have a single function for describing the structure of a NAL unit
instead of duplicating the function for read and write.
There are various minor fixes in the actual driver code including proper
handling of CMD_STOP and CMD_START for draining the encoder, an increased
estimate of the encoded stream size, and fixed handling of the busy state of
the ctrl handler.
Implementing draining also required Patch 1 ("videobuf2-v4l2: set
last_buffer_dequeued in dqbuf"), which I took from the mailing list. Not sure
how to handle this patch.
As suggested, I moved the driver out of staging.
I tested the driver with v4l2-compliance from the vicodec branch:
v4l2-compliance SHA: 7f5a6e9086653774a8c77bc773ef41c962d5e391, 64 bits
Compliance test for allegro device /dev/video2:
Driver Info:
Driver name : allegro
Card type : Allegro DVT Video Encoder
Bus info : platform:a0009000.video-codec
Driver version : 5.1.0
Capabilities : 0x84208000
Video Memory-to-Memory
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x04208000
Video Memory-to-Memory
Streaming
Extended Pix Format
Detected Stateful Encoder
Required ioctls:
test VIDIOC_QUERYCAP: OK
Allow for multiple opens:
test second /dev/video2 open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 10 Private Controls: 0
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK
test Composing: OK (Not Supported)
test Scaling: OK
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test VIDIOC_EXPBUF: OK
test Requests: OK (Not Supported)
Test input 0:
Streaming ioctls:
test read/write: OK (Not Supported)
test blocking wait: OK
Video Capture: Captured 60 buffers
test MMAP (select): OK
Video Capture: Captured 60 buffers
test MMAP (epoll): OK
test USERPTR (select): OK (Not Supported)
test DMABUF: Cannot test, specify --expbuf-device
Total for allegro device /dev/video2: 49, Succeeded: 49, Failed: 0, Warnings: 0
A more detailed changelog is attached to each patch.
Michael
v4 -> v5:
- add patch for allegro vendor prefix
- move driver out of staging
- implement draining with CMD_STOP and CMD_START
- rewrite NAL unit RBSP generator
v3 -> v4:
- fix checkpatch and compiler warnings
- use v4l2_m2m_buf_copy_metadata to copy buffer metadata
- resolve FIXME regarding channel creation and streamon
- resolve various TODOs
- add mailbox format to firmware info
- add suballocator_size to firmware info
- use struct_size to allocate mcu_msg_push_buffers_internal
- handle *_response messages in a union
- cleanup mcu_send_msg functions
- increase maximum video resolution to 4k
- handle errors when creating a channel
- do not update ctrls after channel is created
- add documentation for nal_h264.h
v2 -> v3:
- add clocks to devicetree bindings
- fix devicetree binding according to review comments on v2
- add missing v4l2 callbacks
- drop unnecessary v4l2 callbacks
- drop debug module parameter poison_capture_buffers
- check firmware size before loading firmware
- rework error handling
v1 -> v2:
- clean up debug log levels
- fix unused variable in allegro_mbox_init
- fix uninitialized variable in allegro_mbox_write
- fix global module parameters
- fix Kconfig dependencies
- return h264 as default codec for mcu
- implement device reset as documented
- document why irq does not wait for clear
- rename ENCODE_ONE_FRM to ENCODE_FRAME
- allow error codes for mcu_channel_id
- move control handler to channel
- add fw version check
- add support for colorspaces
- enable configuration of H.264 levels
- enable configuration of frame size
- enable configuration of bit rate and CPB size
- enable configuration of GOP size
- rework response handling
- fix missing error handling in allegro_h264_write_sps
Hans Verkuil (1):
videobuf2-v4l2: set last_buffer_dequeued in dqbuf
Michael Tretter (4):
media: dt-bindings: media: document allegro-dvt bindings
media: dt-bindings: media: Add vendor prefix for allegro
[media] allegro: add Allegro DVT video IP core driver
[media] allegro: add SPS/PPS nal unit writer
.../devicetree/bindings/media/allegro.txt | 43 +
.../devicetree/bindings/vendor-prefixes.txt | 1 +
MAINTAINERS | 7 +
.../media/common/videobuf2/videobuf2-v4l2.c | 10 +-
drivers/media/platform/Kconfig | 16 +
drivers/media/platform/Makefile | 2 +
drivers/media/platform/allegro-dvt/Makefile | 6 +
.../media/platform/allegro-dvt/allegro-core.c | 3070 +++++++++++++++++
drivers/media/platform/allegro-dvt/nal-h264.c | 1001 ++++++
drivers/media/platform/allegro-dvt/nal-h264.h | 208 ++
10 files changed, 4359 insertions(+), 5 deletions(-)
create mode 100644 Documentation/devicetree/bindings/media/allegro.txt
create mode 100644 drivers/media/platform/allegro-dvt/Makefile
create mode 100644 drivers/media/platform/allegro-dvt/allegro-core.c
create mode 100644 drivers/media/platform/allegro-dvt/nal-h264.c
create mode 100644 drivers/media/platform/allegro-dvt/nal-h264.h
--
2.20.1
