Re: [PATCH 2/5] dt-bindings: perf: stm32: ddrperfm support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Apr 29, 2019 at 10:03:37AM +0000, Gerald BAEZA wrote:
> The DDRPERFM is the DDR Performance Monitor embedded in STM32MP1 SOC.
> 
> This documentation indicates how to enable stm32-ddr-pmu driver on
> DDRPERFM peripheral, via the device tree.
> 
> Signed-off-by: Gerald Baeza <gerald.baeza@xxxxxx>
> ---
>  .../devicetree/bindings/perf/stm32-ddr-pmu.txt         | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/perf/stm32-ddr-pmu.txt
> 
> diff --git a/Documentation/devicetree/bindings/perf/stm32-ddr-pmu.txt b/Documentation/devicetree/bindings/perf/stm32-ddr-pmu.txt
> new file mode 100644
> index 0000000..dabc4c7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/perf/stm32-ddr-pmu.txt
> @@ -0,0 +1,18 @@
> +* STM32 DDR Performance Monitor (DDRPERFM)
> +
> +Required properties:
> +- compatible: must be "st,stm32-ddr-pmu".
> +- reg: physical address and length of the registers set.
> +- clocks: list of phandles and specifiers to all input clocks listed in
> +	  clock-names property.
> +- clock-names: "bus" corresponds to the DDRPERFM bus clock and "ddr" to
> +	       the DDR frequency.

You have 'resets' in the dts.

> +
> +Example:
> +	ddrperfm: perf@5a007000 {
> +		compatible = "st,stm32-ddr-pmu";
> +		reg = <0x5a007000 0x400>;
> +		clocks = <&rcc DDRPERFM>, <&rcc PLL2_R>;
> +		clock-names = "bus", "ddr";
> +	};
> +
> -- 
> 2.7.4



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux