Patch series introducing support for ROHM BD70528 PMIC Resending the series as I forgot Lee from the recipient list of the original mail. ROHM BD70528 is a programmable Power Management IC for battery powered 'ultra low power' systems like the pre-announced NXP i.MX7 ULP. This patch series introduces support for the PMIC. Please note that this driver only supports HW setup where PMIC is connected to I2C on A7 core. The other scenario is to use M4 as a power manager and connect pmic to M4. On such setups the A7 can only access pmic via M4 core using RPMSG virtio. Such setup depends on RPMSG implementation on M4 core and is currently not supported by this patch series. RTC block of the bd70528 can support 'wake' irq which wakes PMIC from standby state. Wake irq's can be armed to wake up system up to 24 hours from arming. bd70528 can also generate alarm interrupts which can be armed to occur years after triggering. The RTC driver does always arm both the waker and alarm irqs and does not utilize longer period of alarm interrupts. All the RTC timers are limited to occur within the next 24 hours. Any suggestions on more elegant timer support are welcome =) GPIO portion of bd70528 driver adds I/O support for driving GPIO pins or reading the state. The interrupt functionality is provided by regmap-irq. Current GPIO driver is not aware of whether the pin(s) are used for I/O or interrupts and it is up-to driver user to ensure there is no misconfiguration or "double use". The power-supply patch included in series is only poorly tested as I lack of hardware with real battery connected. Reset and ADC are not supported by this series. Changelog v14: Changes proposed by Sebastian Reichel - Only charger driver changed - Constifying/staticizing structs - Use dev_get_regmap() instead of providing regmap pointer in parent's driver data - Power type MAINS instead of BATTERY Changelog v13: - Moved WDT enable/disable code from MFD to WDT - Added WDT enable/disable stubs for cases where WDT is omitted from Kconfig Changelog v12: - No functional changes - Fixed styling issues pointed by Lee Jones - Fixed styling issues pointed by Alexandre Belloni - Fixed various styling issues Changelog v11: - No functional changes - Rebased on linux 5.1-rc2 - Dropped patch 9 which was already applied by Mark - renamed dt-bindings patch as suggested by Rob Changelog v10: - Exported locking functions for RTC lock and as a result dropped hid the struct bd70528 from sub-devices who no longer needed it. - removed linux/gpio.h header from GPIO driver. Changelog v9: Changes suggested by Lee Jones - MFD, DT-binding, RTC and WDT changed - DT-bindings: Spelling fixes - RTC and WDT: Use exported function instead of function pointer for WDT arming/disarming - MFD: Export WDT arming/disarming function instead of providing a pointer to it. - Various styling fixes. Changelog v8: - regulators(*), wdt, gpio, rtc, mfd(*) and dt-bindings unchanged. (*)Patches 1-3 squashed to not break bisecting. - removed unnecessary newline from clk - fixed possible use of uninitialized 'reg' from power-supply. Found by 0-day tests and reported by Dan Carpenter. Changelog v7: Only patch 2 changed. - Avoid out-of-array-bounds access at regulator probe if unsupported chip type is passed to bd718x7 regulator driver. Changelog v6: Only patch 10 changed. - styling fixes pointed by Gunter Roeck - dropped RFC tag Changelog v5 (RFC): Only patch 7 changed. - Explained why lock is not needed at GPIO value getting - removed ampersands from function pointer assignments. Changelog v4 (RFC): patches 1,2,3,4,5,10 are unchanged from v3 DT-binding fixes suggested by Rob Herring: - drop interrupt-parent - drop clock-frequency - change pmic node name to a generic one RTC: - enable RTC block's irqs before registering rtc GPIO fixes after initial testing: - fix getting GPIO value when direction is output POWER: - Add ASCII art intended to clarify the charger HW state machine Changelog v3 (RFC): patches 1,2,3,4,5,6,7,8 and 10 are unchanged from v2 RTC fixups suggested by Guenter Roeck: - create bd70528_set_time_locked function in order to simplify error handling and to make mutex lock/unlock path more obvious - don't ignore errors on bd70528_set_time_locked - simplify bd70528_read_alarm enabled condition setting - add __packed to structs where members are mapped to HW registers - remove unnecessary brackets from enable condition in set_wake RTC: fixups suggested by Alessandro Belloni - don't use deprecated devm_rtc_device_register - add alarm_irq_enable callback - add range_min and range_max WDT: - add regmap and mutex pointers to WDT data so that they can be accessed without dereferencing the parent data - remove parent data pointer from WDT data - embed struct watchdog_device into WDT data in order to avoid double allocation. GPIO: - remove unused header as pointed by Linus Walleij POWER: - do not copy the whole MFD data (especially the mutex to avoid all possibilities of accidentally using the copy of a mutex) Changelog v2 (RFC): Mainly feedback from Guenter Roeck: - patches 1, 2, 3, 4, 5, 9 are unchanged. - mfd: own mutex for each bd70528 instance - embed in struct bd70528 - watchdog: do not copy parent device data - watchdog: fix deadlock caused by double locked mutex - watchdog: set initial timeouts and WDT parent information - watchdog: remove unnecessary ping function from ops - watchdog: and the comment regarding it - watchdog: allocate watchdog struct in order to allow multiple WDG instances - rtc: bd70528 fix the order of mutex unlock and re-enabling RTC based timers - rtc: fix the irq mask register address - power: fix the irq mask register address - regulator/regmap-irq: Drop the patches 1, 8 and 9 from original series as those were already applied by Mark Patch 1: split the bd718x7.h to generic and chip specific portions. (breaks compilation without patch 2 and 3) - adapt bd718x7.h changes to bd718x7 regulator driver - adapt bd718x7.h changes to bd718x7 clk driver Patch 2: add MFD core support for bd70528 Patch 3: support bd70528 clk using bd718x7 clk driver Patch 4: document DT bindings for BD70528 Patch 5: support BD70528 GPIO block Patch 6: support BD70528 RTC Patch 7: support BD70528 battery charger Patch 8: support BD70528 watchdog This patch series is based on Linus' v5.1-rc2 tag. --- Matti Vaittinen (8): mfd: regulator: clk: split rohm-bd718x7.h mfd: bd70528: Support ROHM bd70528 PMIC - core clk: bd718x7: Support ROHM BD70528 clk block dt-bindings: mfd: Document first ROHM BD70528 bindings gpio: Initial support for ROHM bd70528 GPIO block rtc: bd70528: Initial support for ROHM bd70528 RTC power: supply: Initial support for ROHM BD70528 PMIC charger block watchdog: bd70528: Initial support for ROHM BD70528 watchdog block .../bindings/mfd/rohm,bd70528-pmic.txt | 102 +++ drivers/clk/Kconfig | 6 +- drivers/clk/clk-bd718x7.c | 24 +- drivers/gpio/Kconfig | 11 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio-bd70528.c | 232 ++++++ drivers/mfd/Kconfig | 17 + drivers/mfd/Makefile | 1 + drivers/mfd/rohm-bd70528.c | 316 ++++++++ drivers/mfd/rohm-bd718x7.c | 23 +- drivers/power/supply/Kconfig | 9 + drivers/power/supply/Makefile | 1 + drivers/power/supply/bd70528-charger.c | 743 ++++++++++++++++++ drivers/regulator/bd718x7-regulator.c | 25 +- drivers/rtc/Kconfig | 8 + drivers/rtc/Makefile | 1 + drivers/rtc/rtc-bd70528.c | 500 ++++++++++++ drivers/watchdog/Kconfig | 12 + drivers/watchdog/Makefile | 1 + drivers/watchdog/bd70528_wdt.c | 290 +++++++ include/linux/mfd/rohm-bd70528.h | 408 ++++++++++ include/linux/mfd/rohm-bd718x7.h | 22 +- include/linux/mfd/rohm-generic.h | 20 + 23 files changed, 2727 insertions(+), 46 deletions(-) create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt create mode 100644 drivers/gpio/gpio-bd70528.c create mode 100644 drivers/mfd/rohm-bd70528.c create mode 100644 drivers/power/supply/bd70528-charger.c create mode 100644 drivers/rtc/rtc-bd70528.c create mode 100644 drivers/watchdog/bd70528_wdt.c create mode 100644 include/linux/mfd/rohm-bd70528.h create mode 100644 include/linux/mfd/rohm-generic.h -- 2.17.2 -- Matti Vaittinen, Linux device drivers ROHM Semiconductors, Finland SWDC Kiviharjunlenkki 1E 90220 OULU FINLAND ~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
