On 5/2/19 3:25 AM, Chanwoo Choi wrote:
> Hi Lukasz,
>
> On 19. 5. 1. 오전 6:19, Lukasz Luba wrote:
>> Hi Chanwoo,
>>
>> On 4/30/19 9:34 AM, Chanwoo Choi wrote:
>>> Hi Lukasz,
>>>
>>> On 19. 4. 19. 오후 10:48, Lukasz Luba wrote:
>>>> This patch adds posibility to choose what type of data should be counted
>>>> by the PPMU counter. Now the type comes from DT where the event has been
>>>> defined. When there is no 'event-data-type' the default value is used,
>>>> which is 'read data in bytes'.
>>>> It is needed when you want to know not only read+write data bytes but
>>>> i.e. only write data in byte, or number of read requests, etc.
>>>>
>>>> Signed-off-by: Lukasz Luba <l.luba@xxxxxxxxxxxxxxxxxxx>
>>>> ---
>>>> drivers/devfreq/event/exynos-ppmu.c | 61 +++++++++++++++++++++++++------------
>>>> include/linux/devfreq-event.h | 6 ++++
>>>> 2 files changed, 48 insertions(+), 19 deletions(-)
>>>>
>>>> diff --git a/drivers/devfreq/event/exynos-ppmu.c b/drivers/devfreq/event/exynos-ppmu.c
>>>> index c61de0b..073bf2c 100644
>>>> --- a/drivers/devfreq/event/exynos-ppmu.c
>>>> +++ b/drivers/devfreq/event/exynos-ppmu.c
>>>> @@ -154,9 +154,9 @@ static int exynos_ppmu_set_event(struct devfreq_event_dev *edev)
>>>> if (ret < 0)
>>>> return ret;
>>>>
>>>> - /* Set the event of Read/Write data count */
>>>> + /* Set the event of proper data type monitoring */
>>>> ret = regmap_write(info->regmap, PPMU_BEVTxSEL(id),
>>>> - PPMU_RO_DATA_CNT | PPMU_WO_DATA_CNT);
>>>> + edev->desc->data_type);
>>>> if (ret < 0)
>>>> return ret;
>>>>
>>>> @@ -368,23 +368,11 @@ static int exynos_ppmu_v2_set_event(struct devfreq_event_dev *edev)
>>>> if (ret < 0)
>>>> return ret;
>>>>
>>>> - /* Set the event of Read/Write data count */
>>>> - switch (id) {
>>>> - case PPMU_PMNCNT0:
>>>> - case PPMU_PMNCNT1:
>>>> - case PPMU_PMNCNT2:
>>>> - ret = regmap_write(info->regmap, PPMU_V2_CH_EVx_TYPE(id),
>>>> - PPMU_V2_RO_DATA_CNT | PPMU_V2_WO_DATA_CNT);
>>>> - if (ret < 0)
>>>> - return ret;
>>>> - break;
>>>> - case PPMU_PMNCNT3:
>>>> - ret = regmap_write(info->regmap, PPMU_V2_CH_EVx_TYPE(id),
>>>> - PPMU_V2_EVT3_RW_DATA_CNT);
>>>> - if (ret < 0)
>>>> - return ret;
>>>> - break;
>>>> - }
>>>> + /* Set the event of proper data type monitoring */
>>>> + ret = regmap_write(info->regmap, PPMU_V2_CH_EVx_TYPE(id),
>>>> + edev->desc->data_type);
>>>> + if (ret < 0)
>>>> + return ret;
>>>>
>>>> /* Reset cycle counter/performance counter and enable PPMU */
>>>> ret = regmap_read(info->regmap, PPMU_V2_PMNC, &pmnc);
>>>> @@ -508,6 +496,7 @@ static int of_get_devfreq_events(struct device_node *np,
>>>> struct device *dev = info->dev;
>>>> struct device_node *events_np, *node;
>>>> int i, j, count;
>>>> + int ret;
>>>>
>>>> events_np = of_get_child_by_name(np, "events");
>>>> if (!events_np) {
>>>> @@ -544,6 +533,40 @@ static int of_get_devfreq_events(struct device_node *np,
>>>> desc[j].driver_data = info;
>>>>
>>>> of_property_read_string(node, "event-name", &desc[j].name);
>>>> + ret = of_property_read_u32(node, "event-data-type",
>>>> + &desc[j].data_type);
>>>> + if (ret) {
>>>> + /* Set the event of proper data type counting.
>>>> + * Check if the data type has been defined in DT,
>>>> + * use default if not.
>>>> + */
>>>> + if (of_device_is_compatible(np,
>>>> + "samsung,exynos-ppmu-v2")) {
>>>
>>> It is not proper to compare the compatible string again
>>> in the device driver. Instead, you can define the ppmu device type
>>> as following and then use 'struct of_device_id' in order to
>>> identify the device type.
>> I have been thinking about modifying the code in similar fashion as you
>> did. Good to see similar approach. I'll take your changes with a small
>> additional code, which sets the 'info->ppmu_type' before the for
>> loop, as an additional patch. Would it be OK if I add you as an author
>> and add Sign-off-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>?
>
> If you agree, just add the my signed-off-by on second line.
OK
Regards,
Lukasz
