On Thu, Apr 25, 2019 at 01:48:58AM +0300, Dmitry Osipenko wrote: > Maxim 77663 has a few minor differences in regards to hardware interface > and available capabilities by comparing it with 77620 and 20024 models, > hence re-use 77620 device-tree binding for the 77663. > > Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx> > --- > Documentation/devicetree/bindings/mfd/max77620.txt | 4 +++- > 1 file changed, 3 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/mfd/max77620.txt b/Documentation/devicetree/bindings/mfd/max77620.txt > index 9c16d51cc15b..9058499051e0 100644 > --- a/Documentation/devicetree/bindings/mfd/max77620.txt > +++ b/Documentation/devicetree/bindings/mfd/max77620.txt > @@ -4,7 +4,8 @@ Required properties: > ------------------- > - compatible: Must be one of > "maxim,max77620" > - "maxim,max20024". > + "maxim,max20024" > + "maxim,max77663". Drop the period so we don't have to remove it on the next addition. With that, Reviewed-by: Rob Herring <robh@xxxxxxxxxx> > - reg: I2C device address. > > Optional properties: > @@ -105,6 +106,7 @@ Optional properties: > Here supported time periods by device in microseconds are as follows: > MAX77620 supports 40, 80, 160, 320, 640, 1280, 2560 and 5120 microseconds. > MAX20024 supports 20, 40, 80, 160, 320, 640, 1280 and 2540 microseconds. > +MAX77663 supports 20, 40, 80, 160, 320, 640, 1280 and 2540 microseconds. > > -maxim,power-ok-control: configure map power ok bit > 1: Enables POK(Power OK) to control nRST_IO and GPIO1 > -- > 2.21.0 >
