Use symbolic names instead of bare numbers to specify clocks.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xxxxxxxxxx>
---
Changes in v2:
- this patch has been added
---
arch/arm/boot/dts/zynq-7000.dtsi | 33 +++++++++++++++++++++------------
1 file changed, 21 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index 36a34ffa30af..9a54b49d0fd2 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -13,6 +13,7 @@
#include "skeleton.dtsi"
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/zynq-7000.h>
/ {
compatible = "xlnx,zynq-7000";
@@ -25,8 +26,8 @@
compatible = "arm,cortex-a9";
device_type = "cpu";
reg = <0>;
- clocks = <&clkc 3>;
clock-latency = <1000>;
+ clocks = <&clkc ZYNQ_CLK_CPU_6OR4X>;
operating-points = <
/* kHz uV */
666667 1000000
@@ -39,7 +40,7 @@
compatible = "arm,cortex-a9";
device_type = "cpu";
reg = <1>;
- clocks = <&clkc 3>;
+ clocks = <&clkc ZYNQ_CLK_CPU_6OR4X>;
};
};
@@ -78,7 +79,8 @@
uart0: uart@e0000000 {
compatible = "xlnx,xuartps";
status = "disabled";
- clocks = <&clkc 23>, <&clkc 40>;
+ clocks = <&clkc ZYNQ_CLK_UART0>,
+ <&clkc ZYNQ_CLK_UART0_APER>;
clock-names = "ref_clk", "aper_clk";
reg = <0xE0000000 0x1000>;
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
@@ -87,7 +89,8 @@
uart1: uart@e0001000 {
compatible = "xlnx,xuartps";
status = "disabled";
- clocks = <&clkc 24>, <&clkc 41>;
+ clocks = <&clkc ZYNQ_CLK_UART1>,
+ <&clkc ZYNQ_CLK_UART1_APER>;
clock-names = "ref_clk", "aper_clk";
reg = <0xE0001000 0x1000>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
@@ -98,7 +101,9 @@
reg = <0xe000b000 0x4000>;
status = "disabled";
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>;
+ clocks = <&clkc ZYNQ_CLK_GEM0_APER>,
+ <&clkc ZYNQ_CLK_GEM0_APER>,
+ <&clkc ZYNQ_CLK_GEM0>;
clock-names = "pclk", "hclk", "tx_clk";
};
@@ -107,7 +112,9 @@
reg = <0xe000c000 0x4000>;
status = "disabled";
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clkc 31>, <&clkc 31>, <&clkc 14>;
+ clocks = <&clkc ZYNQ_CLK_GEM1_APER>,
+ <&clkc ZYNQ_CLK_GEM1_APER>,
+ <&clkc ZYNQ_CLK_GEM1>;
clock-names = "pclk", "hclk", "tx_clk";
};
@@ -115,7 +122,8 @@
compatible = "arasan,sdhci-8.9a";
status = "disabled";
clock-names = "clk_xin", "clk_ahb";
- clocks = <&clkc 21>, <&clkc 32>;
+ clocks = <&clkc ZYNQ_CLK_SDIO0>,
+ <&clkc ZYNQ_CLK_SDIO0_APER>;
interrupt-parent = <&intc>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xe0100000 0x1000>;
@@ -125,7 +133,8 @@
compatible = "arasan,sdhci-8.9a";
status = "disabled";
clock-names = "clk_xin", "clk_ahb";
- clocks = <&clkc 22>, <&clkc 33>;
+ clocks = <&clkc ZYNQ_CLK_SDIO1>,
+ <&clkc ZYNQ_CLK_SDIO1_APER>;
interrupt-parent = <&intc>;
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xe0101000 0x1000>;
@@ -163,7 +172,7 @@
reg = <0xf8f00200 0x20>;
interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
interrupt-parent = <&intc>;
- clocks = <&clkc 4>;
+ clocks = <&clkc ZYNQ_CLK_CPU_3OR2X>;
};
ttc0: ttc0@f8001000 {
@@ -172,7 +181,7 @@
<GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
compatible = "cdns,ttc";
- clocks = <&clkc 6>;
+ clocks = <&clkc ZYNQ_CLK_CPU_1X>;
reg = <0xF8001000 0x1000>;
};
@@ -182,7 +191,7 @@
<GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
compatible = "cdns,ttc";
- clocks = <&clkc 6>;
+ clocks = <&clkc ZYNQ_CLK_CPU_1X>;
reg = <0xF8002000 0x1000>;
};
scutimer: scutimer@f8f00600 {
@@ -190,7 +199,7 @@
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
compatible = "arm,cortex-a9-twd-timer";
reg = < 0xf8f00600 0x20 >;
- clocks = <&clkc 4>;
+ clocks = <&clkc ZYNQ_CLK_CPU_3OR2X>;
} ;
};
};
--
1.9.1.1.gbb9f595
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
