Re: [PATCH v5 2/3] Input: add a driver for GPIO controllable vibrators

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Apr 26, 2019 at 09:47:46PM +0200, Luca Weiss wrote:
> Provide a simple driver for GPIO controllable vibrators.
> It will be used by the Fairphone 2.
> 
> Signed-off-by: Luca Weiss <luca@xxxxxxxxx>

Applied, thank you.

> ---
>  drivers/input/misc/Kconfig      |  12 ++
>  drivers/input/misc/Makefile     |   1 +
>  drivers/input/misc/gpio-vibra.c | 209 ++++++++++++++++++++++++++++++++
>  3 files changed, 222 insertions(+)
>  create mode 100644 drivers/input/misc/gpio-vibra.c
> 
> diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
> index e15ed1bb8558..6dfe9e2fe5b1 100644
> --- a/drivers/input/misc/Kconfig
> +++ b/drivers/input/misc/Kconfig
> @@ -290,6 +290,18 @@ config INPUT_GPIO_DECODER
>  	 To compile this driver as a module, choose M here: the module
>  	 will be called gpio_decoder.
>  
> +config INPUT_GPIO_VIBRA
> +	tristate "GPIO vibrator support"
> +	depends on GPIOLIB || COMPILE_TEST
> +	select INPUT_FF_MEMLESS
> +	help
> +	  Say Y here to get support for GPIO based vibrator devices.
> +
> +	  If unsure, say N.
> +
> +	  To compile this driver as a module, choose M here: the module will be
> +	  called gpio-vibra.
> +
>  config INPUT_IXP4XX_BEEPER
>  	tristate "IXP4XX Beeper support"
>  	depends on ARCH_IXP4XX
> diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
> index b936c5b1d4ac..f38ebbdb05e2 100644
> --- a/drivers/input/misc/Makefile
> +++ b/drivers/input/misc/Makefile
> @@ -36,6 +36,7 @@ obj-$(CONFIG_INPUT_DRV2667_HAPTICS)	+= drv2667.o
>  obj-$(CONFIG_INPUT_GP2A)		+= gp2ap002a00f.o
>  obj-$(CONFIG_INPUT_GPIO_BEEPER)		+= gpio-beeper.o
>  obj-$(CONFIG_INPUT_GPIO_DECODER)	+= gpio_decoder.o
> +obj-$(CONFIG_INPUT_GPIO_VIBRA)		+= gpio-vibra.o
>  obj-$(CONFIG_INPUT_HISI_POWERKEY)	+= hisi_powerkey.o
>  obj-$(CONFIG_HP_SDC_RTC)		+= hp_sdc_rtc.o
>  obj-$(CONFIG_INPUT_IMS_PCU)		+= ims-pcu.o
> diff --git a/drivers/input/misc/gpio-vibra.c b/drivers/input/misc/gpio-vibra.c
> new file mode 100644
> index 000000000000..b76c81015de9
> --- /dev/null
> +++ b/drivers/input/misc/gpio-vibra.c
> @@ -0,0 +1,209 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + *  GPIO vibrator driver
> + *
> + *  Copyright (C) 2019 Luca Weiss <luca@xxxxxxxxx>
> + *
> + *  Based on PWM vibrator driver:
> + *  Copyright (C) 2017 Collabora Ltd.
> + *
> + *  Based on previous work from:
> + *  Copyright (C) 2012 Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
> + *
> + *  Based on PWM beeper driver:
> + *  Copyright (C) 2010, Lars-Peter Clausen <lars@xxxxxxxxxx>
> + */
> +
> +#include <linux/gpio/consumer.h>
> +#include <linux/input.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/property.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/slab.h>
> +
> +struct gpio_vibrator {
> +	struct input_dev *input;
> +	struct gpio_desc *gpio;
> +	struct regulator *vcc;
> +
> +	struct work_struct play_work;
> +	bool running;
> +	bool vcc_on;
> +};
> +
> +static int gpio_vibrator_start(struct gpio_vibrator *vibrator)
> +{
> +	struct device *pdev = vibrator->input->dev.parent;
> +	int err;
> +
> +	if (!vibrator->vcc_on) {
> +		err = regulator_enable(vibrator->vcc);
> +		if (err) {
> +			dev_err(pdev, "failed to enable regulator: %d\n", err);
> +			return err;
> +		}
> +		vibrator->vcc_on = true;
> +	}
> +
> +	gpiod_set_value_cansleep(vibrator->gpio, 1);
> +
> +	return 0;
> +}
> +
> +static void gpio_vibrator_stop(struct gpio_vibrator *vibrator)
> +{
> +	gpiod_set_value_cansleep(vibrator->gpio, 0);
> +
> +	if (vibrator->vcc_on) {
> +		regulator_disable(vibrator->vcc);
> +		vibrator->vcc_on = false;
> +	}
> +}
> +
> +static void gpio_vibrator_play_work(struct work_struct *work)
> +{
> +	struct gpio_vibrator *vibrator =
> +		container_of(work, struct gpio_vibrator, play_work);
> +
> +	if (vibrator->running)
> +		gpio_vibrator_start(vibrator);
> +	else
> +		gpio_vibrator_stop(vibrator);
> +}
> +
> +static int gpio_vibrator_play_effect(struct input_dev *dev, void *data,
> +				     struct ff_effect *effect)
> +{
> +	struct gpio_vibrator *vibrator = input_get_drvdata(dev);
> +
> +	int level = effect->u.rumble.strong_magnitude;
> +
> +	if (!level)
> +		level = effect->u.rumble.weak_magnitude;
> +
> +	if (level)
> +		vibrator->running = true;
> +	else
> +		vibrator->running = false;
> +
> +	schedule_work(&vibrator->play_work);
> +
> +	return 0;
> +}
> +
> +static void gpio_vibrator_close(struct input_dev *input)
> +{
> +	struct gpio_vibrator *vibrator = input_get_drvdata(input);
> +
> +	cancel_work_sync(&vibrator->play_work);
> +	gpio_vibrator_stop(vibrator);
> +	vibrator->running = false;
> +}
> +
> +static int gpio_vibrator_probe(struct platform_device *pdev)
> +{
> +	struct gpio_vibrator *vibrator;
> +	int err;
> +
> +	vibrator = devm_kzalloc(&pdev->dev, sizeof(*vibrator), GFP_KERNEL);
> +	if (!vibrator)
> +		return -ENOMEM;
> +
> +	vibrator->input = devm_input_allocate_device(&pdev->dev);
> +	if (!vibrator->input)
> +		return -ENOMEM;
> +
> +	vibrator->vcc = devm_regulator_get(&pdev->dev, "vcc");
> +	err = PTR_ERR_OR_ZERO(vibrator->vcc);
> +	if (err) {
> +		if (err != -EPROBE_DEFER)
> +			dev_err(&pdev->dev, "Failed to request regulator: %d\n",
> +				err);
> +		return err;
> +	}
> +
> +	vibrator->gpio = devm_gpiod_get(&pdev->dev, "enable", GPIOD_OUT_LOW);
> +	err = PTR_ERR_OR_ZERO(vibrator->gpio);
> +	if (err) {
> +		if (err != -EPROBE_DEFER)
> +			dev_err(&pdev->dev, "Failed to request main gpio: %d\n",
> +				err);
> +		return err;
> +	}
> +
> +	INIT_WORK(&vibrator->play_work, gpio_vibrator_play_work);
> +
> +	vibrator->input->name = "gpio-vibrator";
> +	vibrator->input->id.bustype = BUS_HOST;
> +	vibrator->input->close = gpio_vibrator_close;
> +
> +	input_set_drvdata(vibrator->input, vibrator);
> +	input_set_capability(vibrator->input, EV_FF, FF_RUMBLE);
> +
> +	err = input_ff_create_memless(vibrator->input, NULL,
> +				      gpio_vibrator_play_effect);
> +	if (err) {
> +		dev_err(&pdev->dev, "Couldn't create FF dev: %d\n", err);
> +		return err;
> +	}
> +
> +	err = input_register_device(vibrator->input);
> +	if (err) {
> +		dev_err(&pdev->dev, "Couldn't register input dev: %d\n", err);
> +		return err;
> +	}
> +
> +	platform_set_drvdata(pdev, vibrator);
> +
> +	return 0;
> +}
> +
> +static int __maybe_unused gpio_vibrator_suspend(struct device *dev)
> +{
> +	struct gpio_vibrator *vibrator = dev_get_drvdata(dev);
> +
> +	cancel_work_sync(&vibrator->play_work);
> +	if (vibrator->running)
> +		gpio_vibrator_stop(vibrator);
> +
> +	return 0;
> +}
> +
> +static int __maybe_unused gpio_vibrator_resume(struct device *dev)
> +{
> +	struct gpio_vibrator *vibrator = dev_get_drvdata(dev);
> +
> +	if (vibrator->running)
> +		gpio_vibrator_start(vibrator);
> +
> +	return 0;
> +}
> +
> +static SIMPLE_DEV_PM_OPS(gpio_vibrator_pm_ops,
> +			 gpio_vibrator_suspend, gpio_vibrator_resume);
> +
> +#ifdef CONFIG_OF
> +static const struct of_device_id gpio_vibra_dt_match_table[] = {
> +	{ .compatible = "gpio-vibrator" },
> +	{}
> +};
> +MODULE_DEVICE_TABLE(of, gpio_vibra_dt_match_table);
> +#endif
> +
> +static struct platform_driver gpio_vibrator_driver = {
> +	.probe	= gpio_vibrator_probe,
> +	.driver	= {
> +		.name	= "gpio-vibrator",
> +		.pm	= &gpio_vibrator_pm_ops,
> +		.of_match_table = of_match_ptr(gpio_vibra_dt_match_table),
> +	},
> +};
> +module_platform_driver(gpio_vibrator_driver);
> +
> +MODULE_AUTHOR("Luca Weiss <luca@xxxxxxxx>");
> +MODULE_DESCRIPTION("GPIO vibrator driver");
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("platform:gpio-vibrator");
> -- 
> 2.21.0
> 

-- 
Dmitry



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux