RE: [PATCH 0/5] ARM: rskrza1: Add RZ/A1 IRQC and input switches

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Geert,

Thanks for this patch!

I've been hacking this support into the standard GIC driver in our BSPs 
for years now. :o

On Mon, Apr 29, 2019, Geert Uytterhoeven wrote:
> I expect this driver to be reusable for RZ/A2, after adding a match
> entry with .gic_spi_base = 4.

Yes, the same IP block is in RZ/A2.

So with that said, should we call this driver irq-renesas-rza1.c or just
irq-renesas-rza.c?
It doesn't really matter to me.
For an RZ/A3, we might just use the same IP again.

Side note, I've seen this interrupt pin HW in some older SH4A devices 
(like SH7724 and SH7757). So it's been around for a while.


Chris





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux