Re: [PATCH v2 1/3] thermal: rockchip: fix up the tsadc pinctrl setting error

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



hi,

在 2019/4/28 下午8:45, Daniel Lezcano 写道:
On 25/04/2019 12:12, Elaine Zhang wrote:
Explicitly use the pinctrl to set/unset the right mode
instead of relying on the pinctrl init mode.
And it requires setting the tshut polarity before select pinctrl.

When the temperature sensor mode is set to 0, it will automatically
reset the board via the Clock-Reset-Unit (CRU) if the over temperature
threshold is reached. However, when the pinctrl initializes, it does a
transition to "otp_out" which may lead the SoC restart all the time.

"otp_out" IO may be connected to the RESET circuit on the hardware.
If the IO is in the wrong state, it will trigger RESET.
(similar to the effect of pressing the RESET button)
which will cause the soc to restart all the time.

Signed-off-by: Elaine Zhang <zhangqing@xxxxxxxxxxxxxx>
---
  drivers/thermal/rockchip_thermal.c | 37 ++++++++++++++++++++++++++++++++++---
  1 file changed, 34 insertions(+), 3 deletions(-)

diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
index 9c7643d62ed7..03ff494f2864 100644
--- a/drivers/thermal/rockchip_thermal.c
+++ b/drivers/thermal/rockchip_thermal.c
@@ -172,6 +172,9 @@ struct rockchip_thermal_data {
  	int tshut_temp;
  	enum tshut_mode tshut_mode;
  	enum tshut_polarity tshut_polarity;
+	struct pinctrl *pinctrl;
+	struct pinctrl_state *gpio_state;
+	struct pinctrl_state *otp_state;
  };
/**
@@ -1242,6 +1245,8 @@ static int rockchip_thermal_probe(struct platform_device *pdev)
  		return error;
  	}
+ thermal->chip->control(thermal->regs, false);
+
  	error = clk_prepare_enable(thermal->clk);
  	if (error) {
  		dev_err(&pdev->dev, "failed to enable converter clock: %d\n",
@@ -1267,6 +1272,31 @@ static int rockchip_thermal_probe(struct platform_device *pdev)
  	thermal->chip->initialize(thermal->grf, thermal->regs,
  				  thermal->tshut_polarity);
+ if (thermal->tshut_mode == TSHUT_MODE_GPIO) {
+		thermal->pinctrl = devm_pinctrl_get(&pdev->dev);
+		if (IS_ERR(thermal->pinctrl)) {
+			dev_err(&pdev->dev, "failed to find thermal pinctrl\n");
+			panic("panic_on_find thermal pinctrl...\n");
I realize my comment was confusing. I was not saying to add a panic()
call here but that the code was accessing a NULL pointer. Please remove
the panic.
OK, I'll fixed it.

+			return PTR_ERR(thermal->pinctrl);
+		}
+
+		thermal->gpio_state = pinctrl_lookup_state(thermal->pinctrl,
+							   "gpio");
+		if (IS_ERR_OR_NULL(thermal->gpio_state)) {
+			dev_err(&pdev->dev, "failed to find thermal gpio state\n");
+			return -EINVAL;
+		}
+
+		thermal->otp_state = pinctrl_lookup_state(thermal->pinctrl,
+							  "otpout");
+		if (IS_ERR_OR_NULL(thermal->otp_state)) {
+			dev_err(&pdev->dev, "failed to find thermal otpout state\n");
+			return -EINVAL;
+		}
+
+		pinctrl_select_state(thermal->pinctrl, thermal->otp_state);
I don't understand this portion of code. The test above says tshut_mode
is TSHUT_MODE_GPIO. Why acting on thermal->otp_state then ?


In my previous comment, I was suggesting the following:

Two more fields instead of three:

	struct rockchip_thermal_data {
   		int tshut_temp;
	  	enum tshut_mode tshut_mode;
   		enum tshut_polarity tshut_polarity;
	 	struct pinctrl *pinctrl;
		struct pinctrl_state *pinctrl_state;
	};

	[ ... ]

	thermal->pinctrl = devm_pinctrl_get(&pdev->dev);
	if (IS_ERR(thermal->pinctrl)) {
		dev_err("...");
		return PTR_ERR(thermal->pinctrl);
	}

	thermal->pinctrl_state = pinctrl_lookup_state(thermal->pinctrl,
		thermal->tshut_mode == TSHUT_MODE_GPIO ? "gpio" :
							"otpout";

	if (IS_ERR_OR_NULL(thermal->pinctrl_state) {
		dev_err("...");
		return PTR_ERR(thermal->pinctrl_state);
	}

  	pinctrl_select_state(thermal->pinctrl, thermal->pinctrl_state);


	[ ... ]

Is it wrong ?


+	}
+
  	for (i = 0; i < thermal->chip->chn_num; i++) {
  		error = rockchip_thermal_register_sensor(pdev, thermal,
  						&thermal->sensors[i],
@@ -1337,8 +1367,8 @@ static int __maybe_unused rockchip_thermal_suspend(struct device *dev)
clk_disable(thermal->pclk);
  	clk_disable(thermal->clk);
-
-	pinctrl_pm_select_sleep_state(dev);
+	if (thermal->tshut_mode == TSHUT_MODE_GPIO)
+		pinctrl_select_state(thermal->pinctrl, thermal->gpio_state);
And then:
	 pinctrl_select_state(thermal->pinctrl, thermal->pinctrl_state);

pinctrl select to gpio mode when tsadc suspend and shutdown.

When suspend, tsadc is disabled, the otp_pin should revert to the default gpio state.


return 0;
  }
@@ -1383,7 +1413,8 @@ static int __maybe_unused rockchip_thermal_resume(struct device *dev)
  	for (i = 0; i < thermal->chip->chn_num; i++)
  		rockchip_thermal_toggle_sensor(&thermal->sensors[i], true);
- pinctrl_pm_select_default_state(dev);
+	if (thermal->tshut_mode == TSHUT_MODE_GPIO)
+		pinctrl_select_state(thermal->pinctrl, thermal->otp_state);
And then
	pinctrl_select_state(thermal->pinctrl, thermal->pinctrl_state);

pinctrl select to otp mode when tsadc resume.


  	return 0;
  }







[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux