Add driver code for the SiFive FU540 PRCI IP block. This IP block
handles reset and clock control for the SiFive FU540 device and
implements SoC-level clock tree controls and dividers.
Based on code written by Wesley Terpstra <wesley@xxxxxxxxxx>:
https://github.com/riscv/riscv-linux/commit/999529edf517ed75b56659d456d221b2ee56bb60
Boot and PLL rate change were tested on a SiFive HiFive Unleashed
board.
This version includes several changes requested by Stephen Boyd
<sboyd@xxxxxxxxxx>.
Signed-off-by: Paul Walmsley <paul.walmsley@xxxxxxxxxx>
Signed-off-by: Paul Walmsley <paul@xxxxxxxxx>
Cc: Michael Turquette <mturquette@xxxxxxxxxxxx>
Cc: Stephen Boyd <sboyd@xxxxxxxxxx>
Cc: Albert Ou <aou@xxxxxxxxxxxxxxxxx>
Cc: Wesley W. Terpstra <wesley@xxxxxxxxxx>
Cc: Palmer Dabbelt <palmer@xxxxxxxxxx>
Cc: Megan Wachs <megan@xxxxxxxxxx>
Cc: linux-riscv@xxxxxxxxxxxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx
Cc: linux-clk@xxxxxxxxxxxxxxx
---
drivers/clk/Kconfig | 1 +
drivers/clk/Makefile | 1 +
drivers/clk/sifive/Kconfig | 18 +
drivers/clk/sifive/Makefile | 1 +
drivers/clk/sifive/fu540-prci.c | 630 ++++++++++++++++++++++++++++++++
5 files changed, 651 insertions(+)
create mode 100644 drivers/clk/sifive/Kconfig
create mode 100644 drivers/clk/sifive/Makefile
create mode 100644 drivers/clk/sifive/fu540-prci.c
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 83dc90bd5179..d2f94ff9b0fc 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -310,6 +310,7 @@ source "drivers/clk/mvebu/Kconfig"
source "drivers/clk/qcom/Kconfig"
source "drivers/clk/renesas/Kconfig"
source "drivers/clk/samsung/Kconfig"
+source "drivers/clk/sifive/Kconfig"
source "drivers/clk/sprd/Kconfig"
source "drivers/clk/sunxi-ng/Kconfig"
source "drivers/clk/tegra/Kconfig"
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 091ee1d8af65..5173a5ae1069 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -94,6 +94,7 @@ obj-$(CONFIG_COMMON_CLK_QCOM) += qcom/
obj-y += renesas/
obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/
obj-$(CONFIG_COMMON_CLK_SAMSUNG) += samsung/
+obj-y += sifive/
obj-$(CONFIG_ARCH_SIRF) += sirf/
obj-$(CONFIG_ARCH_SOCFPGA) += socfpga/
obj-$(CONFIG_PLAT_SPEAR) += spear/
diff --git a/drivers/clk/sifive/Kconfig b/drivers/clk/sifive/Kconfig
new file mode 100644
index 000000000000..8db4a3eb4782
--- /dev/null
+++ b/drivers/clk/sifive/Kconfig
@@ -0,0 +1,18 @@
+# SPDX-License-Identifier: GPL-2.0
+
+menuconfig CLK_SIFIVE
+ bool "SiFive SoC driver support"
+ help
+ SoC drivers for SiFive Linux-capable SoCs.
+
+if CLK_SIFIVE
+
+config CLK_SIFIVE_FU540_PRCI
+ bool "PRCI driver for SiFive FU540 SoCs"
+ select CLK_ANALOGBITS_WRPLL_CLN28HPC
+ help
+ Supports the Power Reset Clock interface (PRCI) IP block found in
+ FU540 SoCs. If this kernel is meant to run on a SiFive FU540 SoC,
+ enable this driver.
+
+endif
diff --git a/drivers/clk/sifive/Makefile b/drivers/clk/sifive/Makefile
new file mode 100644
index 000000000000..74d58a4c0756
--- /dev/null
+++ b/drivers/clk/sifive/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_CLK_SIFIVE_FU540_PRCI) += fu540-prci.o
diff --git a/drivers/clk/sifive/fu540-prci.c b/drivers/clk/sifive/fu540-prci.c
new file mode 100644
index 000000000000..ecf1dfbcc645
--- /dev/null
+++ b/drivers/clk/sifive/fu540-prci.c
@@ -0,0 +1,630 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 SiFive, Inc.
+ * Wesley Terpstra
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * The FU540 PRCI implements clock and reset control for the SiFive
+ * FU540-C000 chip. This driver assumes that it has sole control
+ * over all PRCI resources.
+ *
+ * This driver is based on the PRCI driver written by Wesley Terpstra:
+ * https://github.com/riscv/riscv-linux/commit/999529edf517ed75b56659d456d221b2ee56bb60
+ *
+ * References:
+ * - SiFive FU540-C000 manual v1p0, Chapter 7 "Clocking and Reset"
+ */
+
+#include <dt-bindings/clock/sifive-fu540-prci.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/clk/analogbits-wrpll-cln28hpc.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_clk.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+/*
+ * EXPECTED_CLK_PARENT_COUNT: how many parent clocks this driver expects:
+ * hfclk and rtcclk
+ */
+#define EXPECTED_CLK_PARENT_COUNT 2
+
+/*
+ * Register offsets and bitmasks
+ */
+
+/* COREPLLCFG0 */
+#define PRCI_COREPLLCFG0_OFFSET 0x4
+# define PRCI_COREPLLCFG0_DIVR_SHIFT 0
+# define PRCI_COREPLLCFG0_DIVR_MASK (0x3f << PRCI_COREPLLCFG0_DIVR_SHIFT)
+# define PRCI_COREPLLCFG0_DIVF_SHIFT 6
+# define PRCI_COREPLLCFG0_DIVF_MASK (0x1ff << PRCI_COREPLLCFG0_DIVF_SHIFT)
+# define PRCI_COREPLLCFG0_DIVQ_SHIFT 15
+# define PRCI_COREPLLCFG0_DIVQ_MASK (0x7 << PRCI_COREPLLCFG0_DIVQ_SHIFT)
+# define PRCI_COREPLLCFG0_RANGE_SHIFT 18
+# define PRCI_COREPLLCFG0_RANGE_MASK (0x7 << PRCI_COREPLLCFG0_RANGE_SHIFT)
+# define PRCI_COREPLLCFG0_BYPASS_SHIFT 24
+# define PRCI_COREPLLCFG0_BYPASS_MASK (0x1 << PRCI_COREPLLCFG0_BYPASS_SHIFT)
+# define PRCI_COREPLLCFG0_FSE_SHIFT 25
+# define PRCI_COREPLLCFG0_FSE_MASK (0x1 << PRCI_COREPLLCFG0_FSE_SHIFT)
+# define PRCI_COREPLLCFG0_LOCK_SHIFT 31
+# define PRCI_COREPLLCFG0_LOCK_MASK (0x1 << PRCI_COREPLLCFG0_LOCK_SHIFT)
+
+/* DDRPLLCFG0 */
+#define PRCI_DDRPLLCFG0_OFFSET 0xc
+# define PRCI_DDRPLLCFG0_DIVR_SHIFT 0
+# define PRCI_DDRPLLCFG0_DIVR_MASK (0x3f << PRCI_DDRPLLCFG0_DIVR_SHIFT)
+# define PRCI_DDRPLLCFG0_DIVF_SHIFT 6
+# define PRCI_DDRPLLCFG0_DIVF_MASK (0x1ff << PRCI_DDRPLLCFG0_DIVF_SHIFT)
+# define PRCI_DDRPLLCFG0_DIVQ_SHIFT 15
+# define PRCI_DDRPLLCFG0_DIVQ_MASK (0x7 << PRCI_DDRPLLCFG0_DIVQ_SHIFT)
+# define PRCI_DDRPLLCFG0_RANGE_SHIFT 18
+# define PRCI_DDRPLLCFG0_RANGE_MASK (0x7 << PRCI_DDRPLLCFG0_RANGE_SHIFT)
+# define PRCI_DDRPLLCFG0_BYPASS_SHIFT 24
+# define PRCI_DDRPLLCFG0_BYPASS_MASK (0x1 << PRCI_DDRPLLCFG0_BYPASS_SHIFT)
+# define PRCI_DDRPLLCFG0_FSE_SHIFT 25
+# define PRCI_DDRPLLCFG0_FSE_MASK (0x1 << PRCI_DDRPLLCFG0_FSE_SHIFT)
+# define PRCI_DDRPLLCFG0_LOCK_SHIFT 31
+# define PRCI_DDRPLLCFG0_LOCK_MASK (0x1 << PRCI_DDRPLLCFG0_LOCK_SHIFT)
+
+/* DDRPLLCFG1 */
+#define PRCI_DDRPLLCFG1_OFFSET 0x10
+# define PRCI_DDRPLLCFG1_CKE_SHIFT 24
+# define PRCI_DDRPLLCFG1_CKE_MASK (0x1 << PRCI_DDRPLLCFG1_CKE_SHIFT)
+
+/* GEMGXLPLLCFG0 */
+#define PRCI_GEMGXLPLLCFG0_OFFSET 0x1c
+# define PRCI_GEMGXLPLLCFG0_DIVR_SHIFT 0
+# define PRCI_GEMGXLPLLCFG0_DIVR_MASK (0x3f << PRCI_GEMGXLPLLCFG0_DIVR_SHIFT)
+# define PRCI_GEMGXLPLLCFG0_DIVF_SHIFT 6
+# define PRCI_GEMGXLPLLCFG0_DIVF_MASK (0x1ff << PRCI_GEMGXLPLLCFG0_DIVF_SHIFT)
+# define PRCI_GEMGXLPLLCFG0_DIVQ_SHIFT 15
+# define PRCI_GEMGXLPLLCFG0_DIVQ_MASK (0x7 << PRCI_GEMGXLPLLCFG0_DIVQ_SHIFT)
+# define PRCI_GEMGXLPLLCFG0_RANGE_SHIFT 18
+# define PRCI_GEMGXLPLLCFG0_RANGE_MASK (0x7 << PRCI_GEMGXLPLLCFG0_RANGE_SHIFT)
+# define PRCI_GEMGXLPLLCFG0_BYPASS_SHIFT 24
+# define PRCI_GEMGXLPLLCFG0_BYPASS_MASK (0x1 << PRCI_GEMGXLPLLCFG0_BYPASS_SHIFT)
+# define PRCI_GEMGXLPLLCFG0_FSE_SHIFT 25
+# define PRCI_GEMGXLPLLCFG0_FSE_MASK (0x1 << PRCI_GEMGXLPLLCFG0_FSE_SHIFT)
+# define PRCI_GEMGXLPLLCFG0_LOCK_SHIFT 31
+# define PRCI_GEMGXLPLLCFG0_LOCK_MASK (0x1 << PRCI_GEMGXLPLLCFG0_LOCK_SHIFT)
+
+/* GEMGXLPLLCFG1 */
+#define PRCI_GEMGXLPLLCFG1_OFFSET 0x20
+# define PRCI_GEMGXLPLLCFG1_CKE_SHIFT 24
+# define PRCI_GEMGXLPLLCFG1_CKE_MASK (0x1 << PRCI_GEMGXLPLLCFG1_CKE_SHIFT)
+
+/* CORECLKSEL */
+#define PRCI_CORECLKSEL_OFFSET 0x24
+# define PRCI_CORECLKSEL_CORECLKSEL_SHIFT 0
+# define PRCI_CORECLKSEL_CORECLKSEL_MASK (0x1 << PRCI_CORECLKSEL_CORECLKSEL_SHIFT)
+
+/* DEVICESRESETREG */
+#define PRCI_DEVICESRESETREG_OFFSET 0x28
+# define PRCI_DEVICESRESETREG_DDR_CTRL_RST_N_SHIFT 0
+# define PRCI_DEVICESRESETREG_DDR_CTRL_RST_N_MASK (0x1 << PRCI_DEVICESRESETREG_DDR_CTRL_RST_N_SHIFT)
+# define PRCI_DEVICESRESETREG_DDR_AXI_RST_N_SHIFT 1
+# define PRCI_DEVICESRESETREG_DDR_AXI_RST_N_MASK (0x1 << PRCI_DEVICESRESETREG_DDR_AXI_RST_N_SHIFT)
+# define PRCI_DEVICESRESETREG_DDR_AHB_RST_N_SHIFT 2
+# define PRCI_DEVICESRESETREG_DDR_AHB_RST_N_MASK (0x1 << PRCI_DEVICESRESETREG_DDR_AHB_RST_N_SHIFT)
+# define PRCI_DEVICESRESETREG_DDR_PHY_RST_N_SHIFT 3
+# define PRCI_DEVICESRESETREG_DDR_PHY_RST_N_MASK (0x1 << PRCI_DEVICESRESETREG_DDR_PHY_RST_N_SHIFT)
+# define PRCI_DEVICESRESETREG_GEMGXL_RST_N_SHIFT 5
+# define PRCI_DEVICESRESETREG_GEMGXL_RST_N_MASK (0x1 << PRCI_DEVICESRESETREG_GEMGXL_RST_N_SHIFT)
+
+/* CLKMUXSTATUSREG */
+#define PRCI_CLKMUXSTATUSREG_OFFSET 0x2c
+# define PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_SHIFT 1
+# define PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_MASK (0x1 << PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_SHIFT)
+
+/*
+ * Private structures
+ */
+
+/**
+ * struct __prci_data - per-device-instance data
+ * @va: base virtual address of the PRCI IP block
+ * @hw_clks: encapsulates struct clk_hw records
+ *
+ * PRCI per-device instance data
+ */
+struct __prci_data {
+ void __iomem *va;
+ struct clk_hw_onecell_data hw_clks;
+};
+
+/**
+ * struct __prci_wrpll_data - WRPLL configuration and integration data
+ * @c: WRPLL current configuration record
+ * @enable_bypass: fn ptr to code to bypass the WRPLL (if applicable; else NULL)
+ * @disable_bypass: fn ptr to code to not bypass the WRPLL (or NULL)
+ * @cfg0_offs: WRPLL CFG0 register offset (in bytes) from the PRCI base address
+ *
+ * @enable_bypass and @disable_bypass are used for WRPLL instances
+ * that contain a separate external glitchless clock mux downstream
+ * from the PLL. The WRPLL internal bypass mux is not glitchless.
+ */
+struct __prci_wrpll_data {
+ struct analogbits_wrpll_cfg c;
+ void (*enable_bypass)(struct __prci_data *pd);
+ void (*disable_bypass)(struct __prci_data *pd);
+ u8 cfg0_offs;
+};
+
+/**
+ * struct __prci_clock - describes a clock device managed by PRCI
+ * @name: user-readable clock name string - should match the manual
+ * @parent_name: parent name for this clock
+ * @ops: struct clk_ops for the Linux clock framework to use for control
+ * @hw: Linux-private clock data
+ * @pwd: WRPLL-specific data, associated with this clock (if not NULL)
+ * @pd: PRCI-specific data associated with this clock (if not NULL)
+ *
+ * PRCI clock data. Used by the PRCI driver to register PRCI-provided
+ * clocks to the Linux clock infrastructure.
+ */
+struct __prci_clock {
+ const char *name;
+ const char *parent_name;
+ const struct clk_ops *ops;
+ struct clk_hw hw;
+ struct __prci_wrpll_data *pwd;
+ struct __prci_data *pd;
+};
+
+#define clk_hw_to_prci_clock(pwd) container_of(pwd, struct __prci_clock, hw)
+
+/*
+ * Private functions
+ */
+
+/**
+ * __prci_readl() - read from a PRCI register
+ * @pd: PRCI context
+ * @offs: register offset to read from (in bytes, from PRCI base address)
+ *
+ * Read the register located at offset @offs from the base virtual
+ * address of the PRCI register target described by @pd, and return
+ * the value to the caller.
+ *
+ * Context: Any context.
+ *
+ * Return: the contents of the register described by @pd and @offs.
+ */
+static u32 __prci_readl(struct __prci_data *pd, u32 offs)
+{
+ return readl_relaxed(pd->va + offs);
+}
+
+static void __prci_writel(u32 v, u32 offs, struct __prci_data *pd)
+{
+ return writel_relaxed(v, pd->va + offs);
+}
+
+/* WRPLL-related private functions */
+
+/**
+ * __prci_wrpll_unpack() - unpack WRPLL configuration registers into parameters
+ * @c: ptr to a struct analogbits_wrpll_cfg record to write config into
+ * @r: value read from the PRCI PLL configuration register
+ *
+ * Given a value @r read from an FU540 PRCI PLL configuration register,
+ * split it into fields and populate it into the WRPLL configuration record
+ * pointed to by @c.
+ *
+ * The COREPLLCFG0 macros are used below, but the other *PLLCFG0 macros
+ * have the same register layout.
+ *
+ * Context: Any context.
+ */
+static void __prci_wrpll_unpack(struct analogbits_wrpll_cfg *c, u32 r)
+{
+ u32 v;
+
+ v = r & PRCI_COREPLLCFG0_DIVR_MASK;
+ v >>= PRCI_COREPLLCFG0_DIVR_SHIFT;
+ c->divr = v;
+
+ v = r & PRCI_COREPLLCFG0_DIVF_MASK;
+ v >>= PRCI_COREPLLCFG0_DIVF_SHIFT;
+ c->divf = v;
+
+ v = r & PRCI_COREPLLCFG0_DIVQ_MASK;
+ v >>= PRCI_COREPLLCFG0_DIVQ_SHIFT;
+ c->divq = v;
+
+ v = r & PRCI_COREPLLCFG0_RANGE_MASK;
+ v >>= PRCI_COREPLLCFG0_RANGE_SHIFT;
+ c->range = v;
+
+ c->flags &= (WRPLL_FLAGS_INT_FEEDBACK_MASK |
+ WRPLL_FLAGS_EXT_FEEDBACK_MASK);
+
+ /* external feedback mode not supported */
+ c->flags |= WRPLL_FLAGS_INT_FEEDBACK_MASK;
+}
+
+/**
+ * __prci_wrpll_pack() - pack PLL configuration parameters into a register value
+ * @c: pointer to a struct analogbits_wrpll_cfg record containing the PLL's cfg
+ *
+ * Using a set of WRPLL configuration values pointed to by @c,
+ * assemble a PRCI PLL configuration register value, and return it to
+ * the caller.
+ *
+ * Context: Any context. Caller must ensure that the contents of the
+ * record pointed to by @c do not change during the execution
+ * of this function.
+ *
+ * Returns: a value suitable for writing into a PRCI PLL configuration
+ * register
+ */
+static u32 __prci_wrpll_pack(struct analogbits_wrpll_cfg * const c)
+{
+ u32 r = 0;
+
+ r |= c->divr << PRCI_COREPLLCFG0_DIVR_SHIFT;
+ r |= c->divf << PRCI_COREPLLCFG0_DIVF_SHIFT;
+ r |= c->divq << PRCI_COREPLLCFG0_DIVQ_SHIFT;
+ r |= c->range << PRCI_COREPLLCFG0_RANGE_SHIFT;
+
+ /* external feedback mode not supported */
+ r |= PRCI_COREPLLCFG0_FSE_MASK;
+
+ return r;
+}
+
+/**
+ * __prci_wrpll_read_cfg() - read the WRPLL configuration from the PRCI
+ * @pd: PRCI context
+ * @pwd: PRCI WRPLL metadata
+ *
+ * Read the current configuration of the PLL identified by @pwd from
+ * the PRCI identified by @pd, and store it into the local configuration
+ * cache in @pwd.
+ *
+ * Context: Any context. Caller must prevent the records pointed to by
+ * @pd and @pwd from changing during execution.
+ */
+static void __prci_wrpll_read_cfg(struct __prci_data *pd,
+ struct __prci_wrpll_data *pwd)
+{
+ __prci_wrpll_unpack(&pwd->c, __prci_readl(pd, pwd->cfg0_offs));
+}
+
+/**
+ * __prci_wrpll_write_cfg() - write WRPLL configuration into the PRCI
+ * @pd: PRCI context
+ * @pwd: PRCI WRPLL metadata
+ * @c: WRPLL configuration record to write
+ *
+ * Write the WRPLL configuration described by @c into the WRPLL
+ * configuration register identified by @pwd in the PRCI instance
+ * described by @c. Make a cached copy of the WRPLL's current
+ * configuration so it can be used by other code.
+ *
+ * Context: Any context. Caller must prevent the records pointed to by
+ * @pd and @pwd from changing during execution.
+ */
+static void __prci_wrpll_write_cfg(struct __prci_data *pd,
+ struct __prci_wrpll_data *pwd,
+ struct analogbits_wrpll_cfg *c)
+{
+ __prci_writel(__prci_wrpll_pack(c), pwd->cfg0_offs, pd);
+
+ memcpy(&pwd->c, c, sizeof(struct analogbits_wrpll_cfg));
+}
+
+/* Core clock mux control */
+
+/**
+ * __prci_coreclksel_use_hfclk() - switch the CORECLK mux to output HFCLK
+ * @pd: struct __prci_data * for the PRCI containing the CORECLK mux reg
+ *
+ * Switch the CORECLK mux to the HFCLK input source; return once complete.
+ *
+ * Context: Any context. Caller must prevent concurrent changes to the
+ * PRCI_CORECLKSEL_OFFSET register.
+ */
+static void __prci_coreclksel_use_hfclk(struct __prci_data *pd)
+{
+ u32 r;
+
+ r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET);
+ r |= PRCI_CORECLKSEL_CORECLKSEL_MASK;
+ __prci_writel(r, PRCI_CORECLKSEL_OFFSET, pd);
+
+ r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); /* barrier */
+}
+
+/**
+ * __prci_coreclksel_use_corepll() - switch the CORECLK mux to output COREPLL
+ * @pd: struct __prci_data * for the PRCI containing the CORECLK mux reg
+ *
+ * Switch the CORECLK mux to the PLL output clock; return once complete.
+ *
+ * Context: Any context. Caller must prevent concurrent changes to the
+ * PRCI_CORECLKSEL_OFFSET register.
+ */
+static void __prci_coreclksel_use_corepll(struct __prci_data *pd)
+{
+ u32 r;
+
+ r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET);
+ r &= ~PRCI_CORECLKSEL_CORECLKSEL_MASK;
+ __prci_writel(r, PRCI_CORECLKSEL_OFFSET, pd);
+
+ r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); /* barrier */
+}
+
+/*
+ * Linux clock framework integration
+ *
+ * See the Linux clock framework documentation for more information on
+ * these functions.
+ */
+
+static unsigned long sifive_fu540_prci_wrpll_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct __prci_clock *pc = clk_hw_to_prci_clock(hw);
+ struct __prci_wrpll_data *pwd = pc->pwd;
+
+ return analogbits_wrpll_calc_output_rate(&pwd->c, parent_rate);
+}
+
+static long sifive_fu540_prci_wrpll_round_rate(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long *parent_rate)
+{
+ struct __prci_clock *pc = clk_hw_to_prci_clock(hw);
+ struct __prci_wrpll_data *pwd = pc->pwd;
+ struct analogbits_wrpll_cfg c;
+
+ memcpy(&c, &pwd->c, sizeof(c));
+
+ analogbits_wrpll_configure_for_rate(&c, rate, *parent_rate);
+
+ return analogbits_wrpll_calc_output_rate(&c, *parent_rate);
+}
+
+static int sifive_fu540_prci_wrpll_set_rate(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct __prci_clock *pc = clk_hw_to_prci_clock(hw);
+ struct __prci_wrpll_data *pwd = pc->pwd;
+ struct __prci_data *pd = pc->pd;
+ int r;
+
+ r = analogbits_wrpll_configure_for_rate(&pwd->c, rate, parent_rate);
+ if (r)
+ return r;
+
+ if (pwd->enable_bypass)
+ pwd->enable_bypass(pd);
+
+ __prci_wrpll_write_cfg(pd, pwd, &pwd->c);
+
+ udelay(analogbits_wrpll_calc_max_lock_us(&pwd->c));
+
+ if (pwd->disable_bypass)
+ pwd->disable_bypass(pd);
+
+ return 0;
+}
+
+static const struct clk_ops sifive_fu540_prci_wrpll_clk_ops = {
+ .set_rate = sifive_fu540_prci_wrpll_set_rate,
+ .round_rate = sifive_fu540_prci_wrpll_round_rate,
+ .recalc_rate = sifive_fu540_prci_wrpll_recalc_rate,
+};
+
+static const struct clk_ops sifive_fu540_prci_wrpll_ro_clk_ops = {
+ .recalc_rate = sifive_fu540_prci_wrpll_recalc_rate,
+};
+
+/* TLCLKSEL clock integration */
+
+static unsigned long sifive_fu540_prci_tlclksel_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct __prci_clock *pc = clk_hw_to_prci_clock(hw);
+ struct __prci_data *pd = pc->pd;
+ u32 v;
+ u8 div;
+
+ v = __prci_readl(pd, PRCI_CLKMUXSTATUSREG_OFFSET);
+ v &= PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_MASK;
+ div = v ? 1 : 2;
+
+ return div_u64(parent_rate, div);
+}
+
+static const struct clk_ops sifive_fu540_prci_tlclksel_clk_ops = {
+ .recalc_rate = sifive_fu540_prci_tlclksel_recalc_rate,
+};
+
+/*
+ * PRCI integration data for each WRPLL instance
+ */
+
+static struct __prci_wrpll_data __prci_corepll_data = {
+ .cfg0_offs = PRCI_COREPLLCFG0_OFFSET,
+ .enable_bypass = __prci_coreclksel_use_hfclk,
+ .disable_bypass = __prci_coreclksel_use_corepll,
+};
+
+static struct __prci_wrpll_data __prci_ddrpll_data = {
+ .cfg0_offs = PRCI_DDRPLLCFG0_OFFSET,
+};
+
+static struct __prci_wrpll_data __prci_gemgxlpll_data = {
+ .cfg0_offs = PRCI_GEMGXLPLLCFG0_OFFSET,
+};
+
+/*
+ * List of clock controls provided by the PRCI
+ */
+
+static struct __prci_clock __prci_init_clocks[] = {
+ [PRCI_CLK_COREPLL] = {
+ .name = "corepll",
+ .parent_name = "hfclk",
+ .ops = &sifive_fu540_prci_wrpll_clk_ops,
+ .pwd = &__prci_corepll_data,
+ },
+ [PRCI_CLK_DDRPLL] = {
+ .name = "ddrpll",
+ .parent_name = "hfclk",
+ .ops = &sifive_fu540_prci_wrpll_ro_clk_ops,
+ .pwd = &__prci_ddrpll_data,
+ },
+ [PRCI_CLK_GEMGXLPLL] = {
+ .name = "gemgxlpll",
+ .parent_name = "hfclk",
+ .ops = &sifive_fu540_prci_wrpll_clk_ops,
+ .pwd = &__prci_gemgxlpll_data,
+ },
+ [PRCI_CLK_TLCLK] = {
+ .name = "tlclk",
+ .parent_name = "corepll",
+ .ops = &sifive_fu540_prci_tlclksel_clk_ops,
+ },
+};
+
+/**
+ * __prci_register_clocks() - register clock controls in the PRCI with Linux
+ * @dev: Linux struct device *
+ *
+ * Register the list of clock controls described in __prci_init_plls[] with
+ * the Linux clock framework.
+ *
+ * Return: 0 upon success or a negative error code upon failure.
+ */
+static int __prci_register_clocks(struct device *dev, struct __prci_data *pd)
+{
+ struct clk_init_data init;
+ struct __prci_clock *pic;
+ int parent_count, i, clk_hw_count, r;
+
+ parent_count = of_clk_get_parent_count(dev->of_node);
+ if (parent_count != EXPECTED_CLK_PARENT_COUNT) {
+ dev_err(dev, "expected only two parent clocks, found %d\n",
+ parent_count);
+ return -EINVAL;
+ }
+
+ memset(&init, 0, sizeof(struct clk_init_data));
+
+ /* Register PLLs */
+ clk_hw_count = sizeof(__prci_init_clocks) / sizeof(struct __prci_clock);
+
+ for (i = 0; i < clk_hw_count; ++i) {
+ pic = &__prci_init_clocks[i];
+
+ init.name = pic->name;
+ init.parent_names = &pic->parent_name;
+ init.num_parents = 1;
+ init.ops = pic->ops;
+ pic->hw.init = &init;
+
+ pic->pd = pd;
+
+ if (pic->pwd)
+ __prci_wrpll_read_cfg(pd, pic->pwd);
+
+ r = devm_clk_hw_register(dev, &pic->hw);
+ if (r) {
+ dev_warn(dev, "Failed to register clock %s: %d\n",
+ init.name, r);
+ return r;
+ }
+
+ r = clk_hw_register_clkdev(&pic->hw, pic->name, dev_name(dev));
+ if (r) {
+ dev_warn(dev, "Failed to register clkdev for %s: %d\n",
+ init.name, r);
+ return r;
+ }
+
+ pd->hw_clks.hws[i] = &pic->hw;
+ }
+
+ pd->hw_clks.num = i;
+
+ r = devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
+ &pd->hw_clks);
+ if (r) {
+ dev_err(dev, "could not add hw_provider: %d\n", r);
+ return r;
+ }
+
+ return 0;
+}
+
+/*
+ * Linux device model integration
+ *
+ * See the Linux device model documentation for more information about
+ * these functions.
+ */
+static int sifive_fu540_prci_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct resource *res;
+ struct __prci_data *pd;
+ int r;
+
+ pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL);
+ if (!pd)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ pd->va = devm_ioremap_resource(dev, res);
+ if (IS_ERR(pd->va))
+ return PTR_ERR(pd->va);
+
+ r = __prci_register_clocks(dev, pd);
+ if (r) {
+ dev_err(dev, "could not register clocks: %d\n", r);
+ return r;
+ }
+
+ dev_dbg(dev, "SiFive FU540 PRCI probed\n");
+
+ return 0;
+}
+
+static const struct of_device_id sifive_fu540_prci_of_match[] = {
+ { .compatible = "sifive,fu540-c000-prci", },
