Hi Pawel,
On 10/04/2019 10:48, Pawel Laszczak wrote:
> This patch aim at documenting USB related dt-bindings for the
> Cadence USBSS-DRD controller.
>
> Signed-off-by: Pawel Laszczak <pawell@xxxxxxxxxxx>
> Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
>
> ---
> .../devicetree/bindings/usb/cdns-usb3.txt | 30 +++++++++++++++++++
> 1 file changed, 30 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/usb/cdns-usb3.txt
>
> diff --git a/Documentation/devicetree/bindings/usb/cdns-usb3.txt b/Documentation/devicetree/bindings/usb/cdns-usb3.txt
> new file mode 100644
> index 000000000000..1d2b449e3cb4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/cdns-usb3.txt
> @@ -0,0 +1,30 @@
> +Binding for the Cadence USBSS-DRD controller
> +
> +Required properties:
> + - reg: Physical base address and size of the controller's register areas.
> + Controller has 3 different regions:
> + region 1 - HOST registers area
> + region 2 - DEVICE registers area
> + region 3 - OTG/DRD registers area
> + - reg-names - register memory area names:
> + "xhci" - for HOST registers space
> + "dev" - for DEVICE registers space
> + "otg" - for OTG/DRD registers space
> + - compatible: Should contain: "cdns,usb3-1.0.0" or "cdns,usb3-1.0.1"
> + - interrupts: Interrupts used by cdns3 controller.
> +
> +Optional properties:
> + - maximum-speed : valid arguments are "super-speed", "high-speed" and
> + "full-speed"; refer to usb/generic.txt
> + - dr_mode: Should be one of "host", "peripheral" or "otg".
> + - phys: reference to the USB PHY
In your test platform is this a 2.0PHY or 3.0PHY? Typical platforms will have both.
Is there any power-on sequencing requirements for powering up these PHYs vs powering up the controller?
> +
> +Example:
> + usb@f3000000 {
> + compatible = "cdns,usb3-1.0.1";
> + interrupts = <USB_IRQ 7 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0xf3000000 0x10000 /* memory area for HOST registers */
> + 0xf3010000 0x10000 /* memory area for DEVICE registers */
> + 0xf3020000 0x10000>; /* memory area for OTG/DRD registers */
> + reg-names = "xhci", "dev", "otg";
> + };
>
--
cheers,
-roger
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
