Hi Thierry,
Eduardo have picked this series to his branch except dts patches.
Please check
"git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal.git"
in the linus branch. They will be merged in the next major kernel release.
Could you please take these three dts changes?
Here is the list:
[PATCH v2 03/12] arm64: dts: tegra210: set thermtrip
[PATCH v2 06/12] arm64: dts: tegra210: set gpu hw throttle level
[PATCH v2 10/12] arm64: dts: tegra210: set EDP interrupt line
Thanks.
Wei.
On 21/2/2019 6:18 PM, Wei Ni wrote:
> Set "nvidia,thermtrips" property, it used to set
> HW shutdown temperatures.
>
> Signed-off-by: Wei Ni <wni@xxxxxxxxxx>
> ---
> arch/arm64/boot/dts/nvidia/tegra210.dtsi | 15 +++++++++------
> 1 file changed, 9 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
> index 6574396d2257..582d56820bbb 100644
> --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi
> +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
> @@ -1410,6 +1410,9 @@
> reset-names = "soctherm";
> #thermal-sensor-cells = <1>;
>
> + nvidia,thermtrips = <TEGRA124_SOCTHERM_SENSOR_CPU 102500
> + TEGRA124_SOCTHERM_SENSOR_GPU 103000>;
> +
> throttle-cfgs {
> throttle_heavy: heavy {
> nvidia,priority = <100>;
> @@ -1429,8 +1432,8 @@
> <&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>;
>
> trips {
> - cpu-shutdown-trip {
> - temperature = <102500>;
> + cpu-critical-trip {
> + temperature = <102000>;
> hysteresis = <0>;
> type = "critical";
> };
> @@ -1457,7 +1460,7 @@
> <&soctherm TEGRA124_SOCTHERM_SENSOR_MEM>;
>
> trips {
> - mem-shutdown-trip {
> + mem-critical-trip {
> temperature = <103000>;
> hysteresis = <0>;
> type = "critical";
> @@ -1479,8 +1482,8 @@
> <&soctherm TEGRA124_SOCTHERM_SENSOR_GPU>;
>
> trips {
> - gpu-shutdown-trip {
> - temperature = <103000>;
> + gpu-critical-trip {
> + temperature = <102500>;
> hysteresis = <0>;
> type = "critical";
> };
> @@ -1507,7 +1510,7 @@
> <&soctherm TEGRA124_SOCTHERM_SENSOR_PLLX>;
>
> trips {
> - pllx-shutdown-trip {
> + pllx-critical-trip {
> temperature = <103000>;
> hysteresis = <0>;
> type = "critical";
>
