Re: [PATCH 0/5] Aspeed: Enable video engine

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 4/24/19 5:50 AM, Hans Verkuil wrote:
Hi Eddie,

On 4/2/19 8:24 PM, Eddie James wrote:
This series enables the video engine on Aspeed BMC platforms. The video engine
clocking is added to the Aspeed clock driver. The use of the video engine reset
line, originally planned to be made externally available in the clock driver,
is removed from the video engine driver. Finally a node for the video engine is
added to the AST2500 devicetree.
The series also includes a missing property for reserved memory in the
devicetree documentation, and a small change to make the video engine driver
start without reserved memory.
I assume you'll post a v3 since there were some comments?


Sure... The only change would be a missing semi-colon in the devicetree doc. And we're only on v2 :)



If you want to get it in for 5.2, then be aware that you should post it tomorrow
at the latest.

Regards,

	Hans

Eddie James (5):
   media: platform: Aspeed: Remove use of reset line
   media: platform: Aspeed: Make reserved memory optional
   media: dt-bindings: aspeed-video: Add missing memory-region property
   clk: Aspeed: Setup video engine clocking
   ARM: dts: aspeed-g5: Add video engine

  .../devicetree/bindings/media/aspeed-video.txt     |  6 ++++
  arch/arm/boot/dts/aspeed-g5.dtsi                   | 10 ++++++
  drivers/clk/clk-aspeed.c                           | 42 ++++++++++++++++++++--
  drivers/media/platform/aspeed-video.c              | 33 ++++-------------
  4 files changed, 61 insertions(+), 30 deletions(-)





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux