Gentle ping... > -----Original Message----- > From: Anson Huang > Sent: Wednesday, April 10, 2019 9:47 AM > To: thierry.reding@xxxxxxxxx; robh+dt@xxxxxxxxxx; mark.rutland@xxxxxxx; > shawnguo@xxxxxxxxxx; s.hauer@xxxxxxxxxxxxxx; kernel@xxxxxxxxxxxxxx; > festevam@xxxxxxxxx; linux@xxxxxxxxxxxxxxx; stefan@xxxxxxxx; > otavio@xxxxxxxxxxxxxxxx; Leonard Crestez <leonard.crestez@xxxxxxx>; > Robin Gong <yibin.gong@xxxxxxx>; u.kleine-koenig@xxxxxxxxxxxxxx; linux- > pwm@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; linux-arm- > kernel@xxxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx > Cc: dl-linux-imx <linux-imx@xxxxxxx> > Subject: [PATCH V11 0/5] Add i.MX7ULP EVK PWM backlight support > > i.MX7ULP EVK board has MIPI-DSI display, its backlight is supplied by TPM > PWM module, this patch set enables i.MX7ULP TPM PWM driver support and > also add backlight support for MIPI-DSI display. > > Changes since V10: > - ONLY change the pwm driver patch. > > Anson Huang (5): > dt-bindings: pwm: Add i.MX TPM PWM binding > pwm: Add i.MX TPM PWM driver support > ARM: imx_v6_v7_defconfig: Add TPM PWM support by default > ARM: dts: imx7ulp: Add tpm pwm support > ARM: dts: imx7ulp-evk: Add backlight support > > .../devicetree/bindings/pwm/imx-tpm-pwm.txt | 22 + > arch/arm/boot/dts/imx7ulp-evk.dts | 21 + > arch/arm/boot/dts/imx7ulp.dtsi | 10 + > arch/arm/configs/imx_v6_v7_defconfig | 1 + > drivers/pwm/Kconfig | 11 + > drivers/pwm/Makefile | 1 + > drivers/pwm/pwm-imx-tpm.c | 442 +++++++++++++++++++++ > 7 files changed, 508 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pwm/imx-tpm- > pwm.txt > create mode 100644 drivers/pwm/pwm-imx-tpm.c > > -- > 2.7.4
