Hi Harini, On Fri, Apr 4, 2014 at 5:00 AM, Harini Katakam <harinikatakamlinux@xxxxxxxxx> wrote: >>> + num-cs = /bits/ 16 <4>; >> >> What's going on with the /bits/ - is this something that's required for >> the property? > > The master->num-chipselect property is 16 bit but writing <4> here directly > leads to 0 being read in of_property_read (because it's big endian). > Instead using of property read u32 and then copying, we decided to do this. > This was discussed on v2 between Michal and Rob: >>>>> + num-chip-select = /bits/ 16 <4>; >>> >>> I was expecting you will comment this a little bit. :-) >>> Because all just reading this num-cs as 32bit and then >>> assigning this value to master->num_chipselect which is 16bit. >> >> Well, everyone else has that problem then. Obviously it takes a bit >> more care than just reading into a u32, but that is a kernel problem >> and not a problem of the binding. > They are not reading it directly with read_u32 but they are using > intermediate u32 value which is assigned to u16 which is fine. > This pattern is in most drivers(maybe all). > The point is if binding should or can't simplify driver code. > And from your reaction above I expect that it is up to driver > owner and binding doc how you want to do it. IMHO this "/bits/ 16" doesn't simplify the binding. As "num-cs" is a generic spi subsystem binding, it should not be restricted to 16 bits for the sake of a driver. As your hardware can drive 4 chip selects, you could represent it in 3 bits (don't!). Simple integers are 32 bit in DT, so use a temporary. Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html