On Mon 15 Apr 03:43 PDT 2019, Georgi Djakov wrote:
> diff --git a/drivers/interconnect/qcom/qcs404.c b/drivers/interconnect/qcom/qcs404.c
[..]
> +#define QCS404_MASTER_AMPSS_M0 0
> +#define QCS404_MASTER_GRAPHICS_3D 1
> +#define QCS404_MASTER_MDP_PORT0 2
> +#define QCS404_SNOC_BIMC_1_MAS 3
> +#define QCS404_MASTER_TCU_0 4
> +#define QCS404_MASTER_SPDM 5
> +#define QCS404_MASTER_BLSP_1 6
> +#define QCS404_MASTER_BLSP_2 7
> +#define QCS404_MASTER_XM_USB_HS1 8
> +#define QCS404_MASTER_CRYPTO_CORE0 9
> +#define QCS404_MASTER_SDCC_1 10
> +#define QCS404_MASTER_SDCC_2 11
> +#define QCS404_SNOC_PNOC_MAS 12
> +#define QCS404_MASTER_QPIC 13
> +#define QCS404_MASTER_QDSS_BAM 14
> +#define QCS404_BIMC_SNOC_MAS 15
> +#define QCS404_PNOC_SNOC_MAS 16
> +#define QCS404_MASTER_QDSS_ETR 17
> +#define QCS404_MASTER_EMAC 18
> +#define QCS404_MASTER_PCIE 19
> +#define QCS404_MASTER_USB3 20
> +#define QCS404_PNOC_INT_0 21
> +#define QCS404_PNOC_INT_2 22
> +#define QCS404_PNOC_INT_3 23
> +#define QCS404_PNOC_SLV_0 24
> +#define QCS404_PNOC_SLV_1 25
> +#define QCS404_PNOC_SLV_2 26
> +#define QCS404_PNOC_SLV_3 27
> +#define QCS404_PNOC_SLV_4 28
> +#define QCS404_PNOC_SLV_6 29
> +#define QCS404_PNOC_SLV_7 30
> +#define QCS404_PNOC_SLV_8 31
> +#define QCS404_PNOC_SLV_9 32
> +#define QCS404_PNOC_SLV_10 33
> +#define QCS404_PNOC_SLV_11 34
> +#define QCS404_SNOC_QDSS_INT 35
> +#define QCS404_SNOC_INT_0 36
> +#define QCS404_SNOC_INT_1 37
> +#define QCS404_SNOC_INT_2 38
> +#define QCS404_SLAVE_EBI_CH0 39
> +#define QCS404_BIMC_SNOC_SLV 40
> +#define QCS404_SLAVE_SPDM_WRAPPER 41
> +#define QCS404_SLAVE_PDM 42
> +#define QCS404_SLAVE_PRNG 43
> +#define QCS404_SLAVE_TCSR 44
> +#define QCS404_SLAVE_SNOC_CFG 45
> +#define QCS404_SLAVE_MESSAGE_RAM 46
> +#define QCS404_SLAVE_DISPLAY_CFG 47
> +#define QCS404_SLAVE_GRAPHICS_3D_CFG 48
> +#define QCS404_SLAVE_BLSP_1 49
> +#define QCS404_SLAVE_TLMM_NORTH 50
> +#define QCS404_SLAVE_PCIE_1 51
> +#define QCS404_SLAVE_EMAC_CFG 52
> +#define QCS404_SLAVE_BLSP_2 53
> +#define QCS404_SLAVE_TLMM_EAST 54
> +#define QCS404_SLAVE_TCU 55
> +#define QCS404_SLAVE_PMIC_ARB 56
> +#define QCS404_SLAVE_SDCC_1 57
> +#define QCS404_SLAVE_SDCC_2 58
> +#define QCS404_SLAVE_TLMM_SOUTH 59
> +#define QCS404_SLAVE_USB_HS 60
> +#define QCS404_SLAVE_USB3 61
> +#define QCS404_SLAVE_CRYPTO_0_CFG 62
> +#define QCS404_PNOC_SNOC_SLV 63
> +#define QCS404_SLAVE_APPSS 64
> +#define QCS404_SLAVE_WCSS 65
> +#define QCS404_SNOC_BIMC_1_SLV 66
> +#define QCS404_SLAVE_OCIMEM 67
> +#define QCS404_SNOC_PNOC_SLV 68
> +#define QCS404_SLAVE_QDSS_STM 69
> +#define QCS404_SLAVE_CATS_128 70
> +#define QCS404_SLAVE_OCMEM_64 71
> +#define QCS404_SLAVE_LPASS 72
An enum would probably be cleaner, given that the actual values are not
significant.
[..]
> +static int qnoc_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + const struct qcom_icc_desc *desc;
> + struct icc_onecell_data *data;
> + struct icc_provider *provider;
> + struct qcom_icc_node **qnodes;
> + struct qcom_icc_provider *qp;
> + struct icc_node *node;
> + size_t num_nodes, i;
> + int ret;
> +
> + rpm = dev_get_drvdata(dev->parent);
> + if (!rpm) {
> + dev_err(dev, "unable to retrieve handle to RPM\n");
> + return -ENODEV;
> + }
In line with my feedback on the DT binding I would prefer if this driver
deals with the devices on the mmio/soc bus and you move the SMD/RPM part
to a separate driver - then perform the SMD/RPM operation by calling
into the other driver.
Given how much of this driver is platforms specific then I think it's a
pretty clean split for adding further (SMD/RPM based) platforms.
Except for the decision on where in the device tree this sits I think
the implementation looks good now!
Regards,
Bjorn
