From: Chen-Yu Tsai <wens@xxxxxxxx> The Bananapi M64 has a micro-USB connector with USB OTG support (that is already enabled). VBUS from this connector is wired to the PMIC's VBUS input. Enable the PMIC's USB power supply on this board, and also hook it up to the USB PHY. Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx> --- arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts index 0a56c0c23ba1..855d1044b9a2 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts @@ -394,8 +394,13 @@ status = "okay"; }; +&usb_power_supply { + status = "okay"; +}; + &usbphy { usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */ + usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_drivevbus>; status = "okay"; }; -- 2.20.1