[PATCH v5 1/3] backlight: lm3630a: return 0 on success in update_status functions

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



lm3630a_bank_a_update_status() and lm3630a_bank_b_update_status()
both return the brightness value if the brightness was successfully
updated. Writing to these attributes via sysfs would cause a 'Bad
address' error to be returned. These functions should return 0 on
success, so let's change it to correct that error.

Signed-off-by: Brian Masney <masneyb@xxxxxxxxxxxxx>
Fixes: 28e64a68a2ef ("backlight: lm3630: apply chip revision")
Acked-by: Pavel Machek <pavel@xxxxxx>
---
 drivers/video/backlight/lm3630a_bl.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/video/backlight/lm3630a_bl.c b/drivers/video/backlight/lm3630a_bl.c
index 2030a6b77a09..ef2553f452ca 100644
--- a/drivers/video/backlight/lm3630a_bl.c
+++ b/drivers/video/backlight/lm3630a_bl.c
@@ -201,7 +201,7 @@ static int lm3630a_bank_a_update_status(struct backlight_device *bl)
 				      LM3630A_LEDA_ENABLE, LM3630A_LEDA_ENABLE);
 	if (ret < 0)
 		goto out_i2c_err;
-	return bl->props.brightness;
+	return 0;
 
 out_i2c_err:
 	dev_err(pchip->dev, "i2c failed to access\n");
@@ -278,7 +278,7 @@ static int lm3630a_bank_b_update_status(struct backlight_device *bl)
 				      LM3630A_LEDB_ENABLE, LM3630A_LEDB_ENABLE);
 	if (ret < 0)
 		goto out_i2c_err;
-	return bl->props.brightness;
+	return 0;
 
 out_i2c_err:
 	dev_err(pchip->dev, "i2c failed to access REG_CTRL\n");
-- 
2.20.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux