Add bindings documentation for Zynq Quad SPI driver. Signed-off-by: Punnaiah Choudary Kalluri <punnaia@xxxxxxxxxx> --- .../devicetree/bindings/spi/spi-zynq-qspi.txt | 26 ++++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 Documentation/devicetree/bindings/spi/spi-zynq-qspi.txt diff --git a/Documentation/devicetree/bindings/spi/spi-zynq-qspi.txt b/Documentation/devicetree/bindings/spi/spi-zynq-qspi.txt new file mode 100644 index 0000000..88e00f8 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-zynq-qspi.txt @@ -0,0 +1,26 @@ +Xilinx Zynq QSPI controller Device Tree Bindings +------------------------------------------------- + +Required properties: +- compatible : Should be "xlnx,zynq-qspi-1.0". +- reg : Physical base address and size of QSPI registers map. +- interrupts : Property with a value describing the interrupt + number. +- interrupt-parent : Must be core interrupt controller +- clock-names : List of input clock names - "ref_clk", "aper_clk" + (See clock bindings for details). +- clocks : Clock phandles (see clock bindings for details). + +Optional properties: +- num-cs : Number of chip selects used. + +Example: + qspi@e000d000 { + compatible = "xlnx,zynq-qspi-1.0"; + clock-names = "ref_clk", "aper_clk"; + clocks = <&clkc 10>, <&clkc 43>; + interrupt-parent = <&ps7_scugic_0>; + interrupts = <0 19 4>; + num-cs = /bits/ 16 <1>; + reg = <0xe000d000 0x1000>; + }; -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html