Hello!
On 17.04.2019 9:22, Oleksij Rempel wrote:
Add ethernet nodes supported by ag71xx driver.
Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
---
arch/mips/boot/dts/qca/ar9331.dtsi | 25 ++++++++++++++++++++
arch/mips/boot/dts/qca/ar9331_dpt_module.dts | 8 +++++++
2 files changed, 33 insertions(+)
diff --git a/arch/mips/boot/dts/qca/ar9331.dtsi b/arch/mips/boot/dts/qca/ar9331.dtsi
index 2bae201aa365..7d59c7c66dda 100644
--- a/arch/mips/boot/dts/qca/ar9331.dtsi
+++ b/arch/mips/boot/dts/qca/ar9331.dtsi
@@ -116,6 +116,31 @@
};
};
+ eth0: eth@19000000 {
The name should be "ethernet@...> according to the DT spec.
+ status = "disabled";
Mmm, this one is typically specified last in the node.
+
+ compatible = "qca,ar9330-eth";
+ reg = <0x19000000 0x200>;
+ interrupts = <4>;
+
+ resets = <&rst 9>;
+ reset-names = "mac";
+ };
+
+ eth1: eth@1a000000 {
"ethernet@..." again.
+ status = "disabled";
+
+ compatible = "qca,ar9330-eth";
+ reg = <0x1a000000 0x200>;
+ interrupts = <5>;
+
+ resets = <&rst 13>, <&rst 23>;
+ reset-names = "mac", "mdio";
+
+ clocks = <&pll ATH79_CLK_MDIO>;
+ clock-names = "mdio";
+ };
+
usb: usb@1b000100 {
compatible = "chipidea,usb2";
reg = <0x1b000000 0x200>;
[...]
MBR, Sergei
