On Tue, Apr 16, 2019 at 11:52:09AM -0400, Yangtao Li wrote: > Allwinner Process Voltage Scaling Tables defines the voltage and > frequency value based on the speedbin blown in the efuse combination. > The sunxi-cpufreq-nvmem driver reads the efuse value from the SoC to > provide the OPP framework with required information. > This is used to determine the voltage and frequency value for each > OPP of operating-points-v2 table when it is parsed by the OPP framework. > > The "allwinner,sun50i-h6-operating-points" DT extends the > "operating-points-v2" > with following parameters: > - nvmem-cells (NVMEM area containig the speedbin information) > - opp-microvolt-<name>: voltage in micro Volts. > At runtime, the platform can pick a <name> and matching > opp-microvolt-<name> property. > HW: <name>: > sun50iw-h6 speed0 speed1 speed2 > > Signed-off-by: Yangtao Li <tiny.windzz@xxxxxxxxx> > --- > .../bindings/opp/sun50i-nvmem-cpufreq.txt | 167 ++++++++++++++++++ > 1 file changed, 167 insertions(+) > create mode 100644 Documentation/devicetree/bindings/opp/sun50i-nvmem-cpufreq.txt > > diff --git a/Documentation/devicetree/bindings/opp/sun50i-nvmem-cpufreq.txt b/Documentation/devicetree/bindings/opp/sun50i-nvmem-cpufreq.txt > new file mode 100644 > index 000000000000..3cb39c6caec3 > --- /dev/null > +++ b/Documentation/devicetree/bindings/opp/sun50i-nvmem-cpufreq.txt > @@ -0,0 +1,167 @@ > +Allwinner Technologies, Inc. NVMEM CPUFreq and OPP bindings > +=================================== > + > +For some SoCs, the CPU frequency subset and voltage value of each OPP > +varies based on the silicon variant in use. Allwinner Process Voltage > +Scaling Tables defines the voltage and frequency value based on the > +speedbin blown in the efuse combination. The sun50i-cpufreq-nvmem driver > +reads the efuse value from the SoC to provide the OPP framework with > +required information. > + > +Required properties: > +-------------------- > +In 'cpus' nodes: > +- operating-points-v2: Phandle to the operating-points-v2 table to use. > + > +In 'operating-points-v2' table: > +- compatible: Should be > + - 'allwinner,sun50i-h6-operating-points'. > +- nvmem-cells: A phandle pointing to a nvmem-cells node representing the > + efuse registers that has information about the speedbin > + that is used to select the right frequency/voltage value > + pair. Please refer the for nvmem-cells bindings > + Documentation/devicetree/bindings/nvmem/nvmem.txt and > + also examples below. > + > +In every OPP node: > +- opp-microvolt-<name>: Voltage in micro Volts. > + At runtime, the platform can pick a <name> and > + matching opp-microvolt-<name> property. > + [See: opp.txt] > + HW: <name>: > + sun50iw-h6 speed0 speed1 speed2 There's a typo here (and in your commit log), it should be sun50i-h6 instead of sun50iw-h6 Once fixed: Acked-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxx> Thanks! Maxime -- Maxime Ripard, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
Attachment:
signature.asc
Description: PGP signature
