STMicrolectronics STM32MP157 MPU are based on a Dual Arm Cortex-A7 core and a
Cortex-M4.
This patchset adds the support of the stm32_rproc driver allowing to control
the M4 remote processor.
Changes since v1:
- Gave details about the memory mapping (in bindings).
- Used 'dma-ranges' instead of 'ranges'.
- Updated the 'compatible' property.
- Remove the 'recovery', 'reset-names' and 'interrupt-names' properties.
- Clarified why / when mailboxes are optional.
Fabien Dessenne (8):
dt-bindings: stm32: add bindings for ML-AHB interconnect
dt-bindings: remoteproc: add bindings for stm32 remote processor
driver
remoteproc: stm32: add an ST stm32_rproc driver
ARM: dts: stm32: add m4 remoteproc support on STM32MP157c
ARM: dts: stm32: declare copro reserved memories on STM32MP157c-ed1
ARM: dts: stm32: enable m4 coprocessor support on STM32MP157c-ed1
ARM: dts: stm32: declare copro reserved memories on STM32MP157a-dk1
ARM: dts: stm32: enable m4 coprocessor support on STM32MP157a-dk1
.../devicetree/bindings/arm/stm32/mlahb.txt | 37 ++
.../devicetree/bindings/remoteproc/stm32-rproc.txt | 64 +++
arch/arm/boot/dts/stm32mp157a-dk1.dts | 52 ++
arch/arm/boot/dts/stm32mp157c-ed1.dts | 52 ++
arch/arm/boot/dts/stm32mp157c.dtsi | 20 +
drivers/remoteproc/Kconfig | 15 +
drivers/remoteproc/Makefile | 1 +
drivers/remoteproc/stm32_rproc.c | 628 +++++++++++++++++++++
8 files changed, 869 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/stm32/mlahb.txt
create mode 100644 Documentation/devicetree/bindings/remoteproc/stm32-rproc.txt
create mode 100644 drivers/remoteproc/stm32_rproc.c
--
2.7.4
