On Thu, Apr 03, 2014 at 01:05:18PM +0530, Subbaraya Sundeep Bhatta wrote:
> Add devicetree bindings for Xilinx axi udc driver.
>
> Signed-off-by: Subbaraya Sundeep Bhatta <sbhatta@xxxxxxxxxx>
> ---
> Changes for v2:
> - replaced xlnx,include-dma with xlnx,has-builtin-dma
>
> .../devicetree/bindings/usb/udc-xilinx.txt | 20 ++++++++++++++++++++
> 1 files changed, 20 insertions(+), 0 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/usb/udc-xilinx.txt
>
> diff --git a/Documentation/devicetree/bindings/usb/udc-xilinx.txt b/Documentation/devicetree/bindings/usb/udc-xilinx.txt
> new file mode 100644
> index 0000000..7c24fac
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/udc-xilinx.txt
> @@ -0,0 +1,20 @@
> +Xilinx AXI USB2 device controller
> +
> +Required properties:
> +- compatible : Should be "xlnx,axi-usb2-device-4.00.a"
> +- reg : Physical base address and size of the Axi USB2
> + device registers map.
> +- interrupts : Property with a value describing the interrupt
> + number.
> +- interrupt-parent : Must be core interrupt controller
> +- xlnx,has-builtin-dma : if DMA is included
isn't there a configuration register to tell you this ?
> +
> +Example:
> + axi-usb2-device@42e00000 {
> + compatible = "xlnx,axi-usb2-device-4.00.a";
> + interrupt-parent = <0x1>;
why isn't interrupt-parent a phandle ?
--
balbi
Attachment:
signature.asc
Description: Digital signature
