Hi, Daniel Best Regards! Anson Huang > -----Original Message----- > > > On 10/04/2019 09:43, Anson Huang wrote: > > Add i.MX8QXP CPU thermal zone support. > > > > Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx> > > --- > > Changes since V10: > > - remove property "imx,sensor-resource-id" and put HW resource ID > inside each > > thermal-sensors' phandle argument. > > --- > > arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 33 > > ++++++++++++++++++++++++++++++ > > 1 file changed, 33 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi > > b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi > > index 70ef3db..cc1d877 100644 > > --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi > > +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi > > @@ -10,6 +10,7 @@ > > #include <dt-bindings/gpio/gpio.h> > > #include <dt-bindings/interrupt-controller/arm-gic.h> > > #include <dt-bindings/pinctrl/pads-imx8qxp.h> > > +#include <dt-bindings/thermal/thermal.h> > > > > / { > > interrupt-parent = <&gic>; > > @@ -149,6 +150,11 @@ > > rtc: rtc { > > compatible = "fsl,imx8qxp-sc-rtc"; > > }; > > + > > + tsens: thermal-sensor { > > + compatible = "fsl,imx8qxp-sc-thermal", "fsl,imx-sc-thermal"; > > + #thermal-sensor-cells = <1>; > > + }; > > }; > > > > timer { > > @@ -484,4 +490,31 @@ > > power-domains = <&pd IMX_SC_R_GPIO_7>; > > }; > > }; > > + > > + thermal_zones: thermal-zones { > > + cpu-thermal0 { > > + polling-delay-passive = <250>; > > + polling-delay = <2000>; > > + thermal-sensors = <&tsens IMX_SC_R_SYSTEM>; > > + trips { > > + cpu_alert0: trip0 { > > + temperature = <107000>; > > + hysteresis = <2000>; > > + type = "passive"; > > + }; > > + cpu_crit0: trip1 { > > + temperature = <127000>; > > + hysteresis = <2000>; > > + type = "critical"; > > + }; > > + }; > > + cooling-maps { > > + map0 { > > + trip = <&cpu_alert0>; > > + cooling-device = > > + <&A35_0 THERMAL_NO_LIMIT > > + THERMAL_NO_LIMIT>; > > <&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > <&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > <&A35_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > <&A35_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > Fix it in V12, thanks. Anson. > > > + }; > > + }; > > + }; > > + }; > > }; > > > > > -- > > <https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww. > linaro.org%2F&data=02%7C01%7Canson.huang%40nxp.com%7Cfca87d > aa526949586d3608d6c1def467%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C > 0%7C0%7C636909560658582260&sdata=zJ9pZFVN94TN3tci4sut9A%2Bz > bnDklZjxy9dwEXCssHk%3D&reserved=0> Linaro.org │ Open source > software for ARM SoCs > > Follow Linaro: > <https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww. > facebook.com%2Fpages%2FLinaro&data=02%7C01%7Canson.huang%4 > 0nxp.com%7Cfca87daa526949586d3608d6c1def467%7C686ea1d3bc2b4c6fa9 > 2cd99c5c301635%7C0%7C0%7C636909560658582260&sdata=8U9ZV3uL > dMfzRitq1cl4tvxpFakxFNGW0TDZ42wDuEc%3D&reserved=0> Facebook > | > <https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Ftwitte > r.com%2F%23!%2Flinaroorg&data=02%7C01%7Canson.huang%40nxp.c > om%7Cfca87daa526949586d3608d6c1def467%7C686ea1d3bc2b4c6fa92cd99 > c5c301635%7C0%7C0%7C636909560658582260&sdata=lJ5yngMoW3ELI > xYQaASAtvGXdNVDxH5BWoKSLwRL0mM%3D&reserved=0> Twitter | > <https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww. > linaro.org%2Flinaro- > blog%2F&data=02%7C01%7Canson.huang%40nxp.com%7Cfca87daa526 > 949586d3608d6c1def467%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C > 0%7C636909560658582260&sdata=hBTpeBSg7JGk0qHbC7DEp2JgN7sVq > yhC2uzBAG%2BP01s%3D&reserved=0> Blog