This patch adds support for GPIO based CS control through SPI core function spi_set_cs. Signed-off-by: Sowjanya Komatineni <skomatineni@xxxxxxxxxx> --- drivers/spi/spi-tegra114.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/spi/spi-tegra114.c b/drivers/spi/spi-tegra114.c index f4e39eb3857c..0b04eba242c0 100644 --- a/drivers/spi/spi-tegra114.c +++ b/drivers/spi/spi-tegra114.c @@ -781,6 +781,9 @@ static u32 tegra_spi_setup_transfer_one(struct spi_device *spi, } else tegra_spi_writel(tspi, command1, SPI_COMMAND1); + /* GPIO based chip select control */ + spi_set_cs(spi, true); + command1 |= SPI_CS_SW_HW; if (spi->mode & SPI_CS_HIGH) command1 |= SPI_CS_SW_VAL; @@ -869,6 +872,8 @@ static int tegra_spi_setup(struct spi_device *spi) } spin_lock_irqsave(&tspi->lock, flags); + /* GPIO based chip select control */ + spi_set_cs(spi, false); val = tspi->def_command1_reg; if (spi->mode & SPI_CS_HIGH) val &= ~SPI_CS_POL_INACTIVE(spi->chip_select); @@ -898,6 +903,8 @@ static void tegra_spi_transfer_end(struct spi_device *spi) struct tegra_spi_data *tspi = spi_master_get_devdata(spi->master); int cs_val = (spi->mode & SPI_CS_HIGH) ? 0 : 1; + /* GPIO based chip select control */ + spi_set_cs(spi, false); if (cs_val) tspi->command1_reg |= SPI_CS_SW_VAL; else -- 2.7.4
