Hi Dong-san,
On Thu, Apr 11, 2019 at 04:54:10PM +0900, Cao Van Dong wrote:
> Add ether node to dtsi for Ether support on the RZ/G1C (r8a77470) SoC.
>
> Signed-off-by: Cao Van Dong <cv-dong@xxxxxxxxxxx>
> ---
> arch/arm/boot/dts/r8a77470.dtsi | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi
> index 9fc9f6a..ae1dba0 100644
> --- a/arch/arm/boot/dts/r8a77470.dtsi
> +++ b/arch/arm/boot/dts/r8a77470.dtsi
> @@ -1099,6 +1099,20 @@
> dma-channels = <13>;
> };
>
> + ether: ethernet@ee700000 {
Nodes should be sorted by
1. Bus address
2. IP block type
So ethernet@ee700000 should go after sd@ee100000.
Otherwise this patch looks good to me.
> + compatible = "renesas,ether-r8a77470",
> + "renesas,rcar-gen2-ether";
> + reg = <0 0xee700000 0 0x400>;
> + interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpg CPG_MOD 813>;
> + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
> + resets = <&cpg 813>;
> + phy-mode = "rmii";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> sdhi0: sd@ee100000 {
> compatible = "renesas,sdhi-r8a77470",
> "renesas,rcar-gen2-sdhi";
> --
> 2.7.4
>
