Re: [PATCH v3 16/26] PCI: OF: Allow of_pci_get_max_link_speed() to be used by PCI Endpoint drivers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Mar 25, 2019 at 03:09:37PM +0530, Kishon Vijay Abraham I wrote:
> of_pci_get_max_link_speed() is built only if CONFIG_PCI is enabled.
> Make of_pci_get_max_link_speed() to be also used by PCI Endpoint
> controllers with just CONFIG_PCI_ENDPOINT enabled.
> 
> Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
> Signed-off-by: Sekhar Nori <nsekhar@xxxxxx>
> ---
>  drivers/pci/Makefile |  2 +-
>  drivers/pci/of.c     | 44 +++++++++++++++++++++++---------------------
>  2 files changed, 24 insertions(+), 22 deletions(-)

I delegated this patch to Bjorn in the patch queue since it needs his
review/ACK to proceed.

Thanks,
Lorenzo

> diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
> index 657d642fcc67..28cdd8c0213a 100644
> --- a/drivers/pci/Makefile
> +++ b/drivers/pci/Makefile
> @@ -10,10 +10,10 @@ obj-$(CONFIG_PCI)		+= access.o bus.o probe.o host-bridge.o \
>  ifdef CONFIG_PCI
>  obj-$(CONFIG_PROC_FS)		+= proc.o
>  obj-$(CONFIG_SYSFS)		+= slot.o
> -obj-$(CONFIG_OF)		+= of.o
>  obj-$(CONFIG_ACPI)		+= pci-acpi.o
>  endif
>  
> +obj-$(CONFIG_OF)		+= of.o
>  obj-$(CONFIG_PCI_QUIRKS)	+= quirks.o
>  obj-$(CONFIG_PCIEPORTBUS)	+= pcie/
>  obj-$(CONFIG_HOTPLUG_PCI)	+= hotplug/
> diff --git a/drivers/pci/of.c b/drivers/pci/of.c
> index 3d32da15c215..8095933f8452 100644
> --- a/drivers/pci/of.c
> +++ b/drivers/pci/of.c
> @@ -15,6 +15,7 @@
>  #include <linux/of_pci.h>
>  #include "pci.h"
>  
> +#ifdef CONFIG_PCI
>  void pci_set_of_node(struct pci_dev *dev)
>  {
>  	if (!dev->bus->dev.of_node)
> @@ -196,27 +197,6 @@ int of_get_pci_domain_nr(struct device_node *node)
>  }
>  EXPORT_SYMBOL_GPL(of_get_pci_domain_nr);
>  
> -/**
> - * This function will try to find the limitation of link speed by finding
> - * a property called "max-link-speed" of the given device node.
> - *
> - * @node: device tree node with the max link speed information
> - *
> - * Returns the associated max link speed from DT, or a negative value if the
> - * required property is not found or is invalid.
> - */
> -int of_pci_get_max_link_speed(struct device_node *node)
> -{
> -	u32 max_link_speed;
> -
> -	if (of_property_read_u32(node, "max-link-speed", &max_link_speed) ||
> -	    max_link_speed > 4)
> -		return -EINVAL;
> -
> -	return max_link_speed;
> -}
> -EXPORT_SYMBOL_GPL(of_pci_get_max_link_speed);
> -
>  /**
>   * of_pci_check_probe_only - Setup probe only mode if linux,pci-probe-only
>   *                           is present and valid
> @@ -537,3 +517,25 @@ int pci_parse_request_of_pci_ranges(struct device *dev,
>  	return err;
>  }
>  
> +#endif /* CONFIG_PCI */
> +
> +/**
> + * This function will try to find the limitation of link speed by finding
> + * a property called "max-link-speed" of the given device node.
> + *
> + * @node: device tree node with the max link speed information
> + *
> + * Returns the associated max link speed from DT, or a negative value if the
> + * required property is not found or is invalid.
> + */
> +int of_pci_get_max_link_speed(struct device_node *node)
> +{
> +	u32 max_link_speed;
> +
> +	if (of_property_read_u32(node, "max-link-speed", &max_link_speed) ||
> +	    max_link_speed > 4)
> +		return -EINVAL;
> +
> +	return max_link_speed;
> +}
> +EXPORT_SYMBOL_GPL(of_pci_get_max_link_speed);
> -- 
> 2.17.1
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux